Matsushita CF-Y5LWVYZ 1 2 service manual Safety work, Install the Pad Cover

Safety work

Pad WP Sheet affixation

	Insertion standard
		(3)
Insertion		(0.4)	(0.4)
after PAD is
pressurized		Inside diameter
Pad FFC is inserted		of grand foil

The hole of a peel of yellowish brown of PAD WP Sheet flaking off paper and a transparent mount is inserted in the pin of the treatment device and

<Touch Pad> affixes.

Touch Pad affixation

Safety work Pad Cover A’ssy

Installs in the receiving stand of the pressurizing

Reinforcement board side

Sticking part outside diameter

The sticking part externals are set

in a grand foil of PAD.

It sticks it according to U convex part

Safety work

After affixes with the hand temporarily, pressurizes with the treatment device so as not to generate the sticking part of Pad Wp Sheet like wrinkle etc.

Sticking part

treatment device.

externals

<Preparation for PAD-2>

Pad Cover Externals

Gasket (PAD) affixation

Affixes in the concave part of a top case

Cutting side

Thing that pad Sheet’s corner does not hang on concave happened the top part side

Pad Cover affixation

Safety work

The top part side affixation in flaking off paper of transparency peel.

Suppress right above

Gasket (PAD) when you

install the Pad Cover

Safety work

Peel off PAD and PAD WP Sheet and assemble again in the procedure of the standard book when you remove PAD COVER by the repair etc.

(For steady adhesive power of PAD COVER and PAD).

Touch Pad connec- tion FFC is passed through the hole.

51