Matsushita CF-Y5LWVYZ 1 2 Installation of LCD Unit, Side with I-PEX stamp, Cable in CN

9.3.6.5. Installation of LCD Unit

Cautions

Cannot be repetition used because of use of a fixed type lock agent.

Exchange for a new article in the case of re-bolting.

Set the LCD Block

Conclude DXYN26+J6FNM A B

	EMI sheet 3	B
Side with comb
dentiform		A

The EMI sheet 3 removes a half exfoliation paper, and twists around a LCD cable, and one of the two sticks it on a bottom case.

Paste EMI sheet 3

15-20

Attach the LCD Unit to the Bottom Case by left justify

Side with 'I-PEX' stamp

Insert the inverter

cable in CN

Cable black	0-1
tape
externals

Safety work	On slope part	Pass between cushions
Bottom case rib side	of hinge metal	with the bottom
	fittings	case boss

Put Conductive Cloth with the black tape left end of the cable set to the bottom case side

Be careful not to cover this hole with the Conductive Cloth

Be along the root of the wall of the LCD

Cable Insert CN of the inverter cable and make the main substrate under slipped

Thing without Cable within 8 (Copper Foil = 9)

Prevent the cable from
being within	8	The inverter cable
(Copper Foil =	9)	is LCD cable back

71