Matsushita CF-Y5LWVYZ 1 2 service manual Removing the LCD Unit, Removing the Hinge Cover L, R, CN9

9.2.18. Removing the LCD Unit

Preparation : perform the section 9.2.1., 9.2.3. and 9.2.4. first.

1.Remove the 1 screw (a).

Screw (a) : DXQT2+E6FNL (N10)

2.Remove the DC-IN jack plate, DC MDM cover and FAN sheet.

FAN sheet : DFMY0428ZA (K65)

3.Peel off the main PWB sheet and remove the connector (CN9), (CN10) of the main board. Main PWB sheet : DFMX1228ZA (K64)

Screw (a)

DC Jack Plate

DC MDM Cover

Main PWB Sheet

FAN Sheet

CN10

CN9

Note:

These sheet cannot be recycled. Please use new parts.

4.Remove the 2 screws (b).

Screw (b) : DXYN26+J6FNM (N11)

5.Peel off the EMI sheet 3 and then remove the LCD unit.

LCD Unit

Screw (b)

Screw (b)

EMI Sheet 3

9.2.19. Removing the Hinge Cover (L), (R)

Preparation : perform the section 9.2.1., 9.2.3.,

9.2.4.and 9.2.18. first.

1.Remove the 2 screws (c) and then remove the hinge Cover (L), (R).

Screw (c) : DRHM0076ZA (N17)

Screw (c)

LCD Unit

Hinge Cover (L)

Screw (c)

Hinge Cover (R)

Note:

Screw (c) cannot be recycled. Please use new parts.

9.2.20.Removing the LCD Unit and the LCD Rear

Preparation : perform the section 9.2.1., 9.2.3., 9.2.4., 9.2.18. and 9.2.19. first.

1.Remove the 2 screws (d). Screw (d) : DRHM0076ZA (N17)

LCD Unit

Screw (d)

Screw (d)

Note:

Screw (d) cannot be recycled. Please use new parts.

33