Matsushita CF-Y5LWVYZ 1 2 Putting Tape for LCD Cable, Preparation for Inverter Case, Order

<Preparation for Inverter Case>

Inverter Case

Inverter tape affixation without transforming.(Room is given)

<The order 1>	Inverter Tape
Affixes fit to rib

Inverter Board is affixed in a 0 1mm both sides tape externals

match

The tape is pulled too much and LCD Front Case is transformed.

Rib

<The order 2> Matches and externals are affixed

So as not to transform LCD Front

Case, affixes.(Refer to a left chart)

	The both sides tape flaking
	off paper is affixed to the
Connection	peel connector.
LCD Cable	Connection
Connection

The both sides tape flaking off paper of the Inverter Case bot- tom (3pieces) is peeled off and affixes to the frame.

<Affixation standard of Inverter Box> 01mm

01mm

The externals part of Inverter Case is set to the above-mentioned line

9.3.2.6. Putting Tape for LCD Cable

Safety Work

Processes straight from
begin to draw out Cable	PET Tape (10mmx35mm)
	Affixes in a connector
	externals match

The Conductive Cloth part is processed to clamping

Affix to reflector surely

The line is matched to the frame externals

Frame

38