Matsushita CF-Y5LWVYZ 1 2 service manual Removing the LCD Cable / Inverter Board, CN2

2.The intuition combination part of LCD rear case (21 places) is separated with LCD front case.

Hook position

LCD Rear

LCD Unit

Note:

-When each hook is removed, it becomes easy to detach if the driver who wraps protection cloth etc. is inserted with LCD Front Case between LCD rear covers, and the slide is repeated.

-Do noting that externals are not damaged.

3.Remove the 1 screw (e) from LCD rear and then remove the LCD hook.

Screw (e) : DXQT2+D25FNL (N6)

Screw (e)

LCD Hook

LCD Rear

9.2.21.Removing the LCD Cable / Inverter Board

Preparation : perform the section 9.2.1., 9.2.3., 9.2.4., 9.2.18. and 9.2.20. first.

1.Peel of the damper, conductive cloth, inverter tape and the tape.

Inverter tape : DFHR3E07ZA (K18)

2.Remove the hinge (L), (R).

3.LCD Ccable is removed from LCD unit board (CN101), and connector (CN1) is removed from

inverter board.

Conductive Cloth

Damper

Inverter Tape

PET Tape

Hinge (R)

CN101

CN1

Damper

LCD Cable Hinge (L)

Note: Conductive Cloth

Conductive cloth and tapes cannot be recycled. Please use new parts.

4.Inverter case is peeled off and Inverter fixed with a both sided tape is taken out.

5.Peel off the tape from inverter.

6.Remove the connector (CN2) and then remove the inverter.

Tape

Inverter

CN2

Inverter Case

Note:

Tape and inverter case cannot be recycled. Please use new parts.

34