Matsushita CF-Y5LWVYZ 1 2 Putting Line Hold Sheet 3 / Line Hold Cushion, Back, Side without tape

9.3.6.4. Putting Line Hold Sheet 3 / Line Hold Cushion

Put on the rib side	Secure the space with
while pulling the	bossing the outer rib
tape

0.5 or more

LAN Cable (upper)

MODEM Cable (lower) < part A details >

Put the cushion for the lead fixation

Safety work	Directionality having
(Content of this page)	The back
	Side without tape
	LAN Cable (upper)

MODEM Cable (lower)

Set the MODEM/LAN

holder in a lower cabinet

Put wire rod fixation tape 3

B

E

< part B details >	A C
Put on the rib side with	D
there not loosening

Pass the under of the cushion for the lead fixation through LAN cable

< part C details >

Push the tape and push the Cable by processing as shown in the figure below

Pull out a MODEM cable just
				0-1
beside in an HDD protection slot,
		Cushion for lead fixation
along the HDD protection slot, and
process the MODEM cable forward			Insert the MODEM
			cable in the slit
	Prevent the cable from running
	aground in boss heaven				E
	side/bossing the outer rib.

0-1

Put on the rib side by processing the tape to lower more than the boss heaven side while pushing

Put on the rib side
with there not
	< part D details >
loosening

		Prevent the cable from
	B	running aground on the
		boss heaven side
MODEM Cable
LAN Cable	A	C	D
	Prevent the cable from		0-2
			2-5
	running aground on the
	rib heaven side
Process the cable in the order			Make the rib
of A-E after positioning the		wire rod fixation
tube of LAN cable			under slipped
		tape 3

Prevent the cable from running aground on the boss heaven side

HDD protection slot

< part E details >

Be careful not to run aground on the boss heaven side about wire rod fixation tape 3

Put on the rib side by pushing so that running aground is not on the boss heaven side

69