Minuteman UPS SNMP-32 Series user manual Configuration PPP, Configuration Web/Telnet, User Account

Page 15

4-6. Configuration: PPP

This screen is to set the PPP dial-up information for the external modem (Fig. 17).

Fig. 17-PPP Screen

4-7. Configuration: Web/Telnet

This screen is to set-up the User Account information for Web/Telnet (Fig. 18).

1.User Account

A.User Name:

This section is to set a user name for the SNMP-32 card’s Web pages. There can be up to up to eight users. The users have to input the user name and password to view the Web pages.

B.Password:

This section is to set a password for the SNMP-32 card’s Web pages. The users have to input the password and the user name to view the Web pages.

C.Permission:

This section is to set the specified user’s authorizations of Read, or Read/Write.

D.IP Filter:

This section is to set a specific IP address for a certain user. This user can only view the Web pages from the specified IP address. If you want the specified user to view the Web pages from any IP address, you can set the IP Filter to *.*.*.*.

Fig. 18-Web/Telnet Screen

15

Image 15

Contents SNMP-32 Series Table of Contents Conventions used in this guide TrademarksIntroduction FeaturesPackage Contents Applications Installation Procedure Internal SNMP-32 cardExternal SNMP-32 card SNMP-32L Only Snmp Utility Group Setup-ProcedureSnmp Utility Set IP address for SNMP-32 card Main Menu Web Management InterfaceInformation System Status Configuration Network Ethernet Connection Type Configuration Snmp Access Control Secondary DNS Server IPSnmp Screen Trap NotificationRecipient’s Email Address for Daily Report Configuration EmailEmail Setting Recipient’s Email Address for Event LogConfiguration PPP Configuration Web/TelnetUser Account Log Information Event Configuration System TimeENV Event List CPS Event ListATS Event List Data Log Log Information DataFirmware Upgrade Procedure Snmp Utility Download Firmware Telnet Telnet ConfigurationSet Snmp MIB System Set Snmp Access ControlReset Configuration to Default Save & RebootUPS Information Uninterruptible Power Supply UPSBattery Information Connected DeviceOutput Status Battery StatusUPS Status Input StatusShutdown UPS Battery mode only Quick Battery TestDeep Battery Calibration Cancel TestGraphic View Screen Graphic ViewTest UPS UPS SettingsUPS Properties UPS RecordedNew Schedule Event Screen RPM Action Remote Power Manager RPM Address Change RPM Setting Fig Select RPMPower off Delay Power Resume DelayRPM Schedule Screen RPM ScheduleCurrent Probe Sensor CPS CPS Status FigThreshold ENV Status Fig Temp/Hum32-Probe ENVATS Status Fig Automatic Transfer Switch ATSInput Power Source a Input Power Source BGeneral Network Management Stations Configuring the NMSIP Addresses AppendixCommunities GatewaysSubnet Mask Routing and Filtering Problem TroubleshootingIf you are a consultant Installation SiteWhat are the symptoms? Obtaining Technical AssistanceLimited Product Warranty Limited Product Warranty