Minuteman UPS SNMP-32 Series user manual Remote Power Manager RPM

Page 29

7-2. Remote Power Manager (RPM)

This section will guide you through the SNMP-32 card’s RPM Web pages. See the RPM User’s Manual for installation instruction.

1.RPM Status (Fig. 44)

Select RPM

Select which RPM to view and control (RPM01-RPM16).

Outlet A-H

Name the outlet. The user can rename each individual outlet (see RPM Setting screen).

Outlet Control

Non-Internet: The outlet can only be controlled locally by the front panel control buttons. The outlets cannot be controlled via the Web page.

Instant Shutdown: The outlet can only be controlled via the Web page. The outlet can be turned on/off instantly by clicking on the outlet icon.

Safe Shutdown: The outlet can only be controlled via the Web page. The outlet will be turned off after XX number of seconds by clicking on the outlet icon (see RPM Setting screen).

Safe Reboot: The outlet can only be controlled via the Web page. The outlet will turned on (reboot) after XX number of seconds (see RPM Setting screen).

On/Off

This is the current state of the outlet, on/off.

Outlet Icon

Clicking on the Outlet Icon will change the state of the outlet (on/off). If the Outlet Icon is yellow, the outlet is on. If the Outlet Icon is white, the outlet is off.

All On Button

Clicking on the All On button will turn all of the outlets on, when the outlets are setup for Internet control.

All Off Button

Clicking on the All Off button will turn all of the outlets off, when the outlets are setup for Internet control.

Fig. 44-RPM Status Screen

29

Page 28 Page 30
Image 29
Page 28 Page 30
Contents SNMP-32 Series Table of Contents Conventions used in this guide TrademarksIntroduction FeaturesPackage Contents Applications External SNMP-32 card SNMP-32L Only Installation ProcedureInternal SNMP-32 card Snmp Utility Group Setup-ProcedureSnmp Utility Set IP address for SNMP-32 card Main Menu Web Management InterfaceInformation System Status Configuration NetworkAccess Control Configuration SnmpSecondary DNS Server IP Ethernet Connection TypeSnmp Screen Trap NotificationEmail Setting Configuration EmailRecipient’s Email Address for Event Log Recipient’s Email Address for Daily ReportUser Account Configuration PPPConfiguration Web/Telnet Log Information Event Configuration System TimeATS Event List ENV Event ListCPS Event List Data Log Log Information DataFirmware Upgrade Procedure Snmp Utility Download Firmware Telnet Telnet ConfigurationReset Configuration to Default Set Snmp Access ControlSave & Reboot Set Snmp MIB SystemBattery Information Uninterruptible Power Supply UPSConnected Device UPS InformationUPS Status Battery StatusInput Status Output StatusDeep Battery Calibration Quick Battery TestCancel Test Shutdown UPS Battery mode onlyGraphic View Screen Graphic ViewUPS Properties UPS SettingsUPS Recorded Test UPSNew Schedule Event Screen RPM Action Remote Power Manager RPM Power off Delay RPM Setting Fig Select RPMPower Resume Delay Address ChangeRPM Schedule Screen RPM ScheduleThreshold Current Probe Sensor CPSCPS Status Fig ENV Status Fig Temp/Hum32-Probe ENVInput Power Source a Automatic Transfer Switch ATSInput Power Source B ATS Status FigGeneral Network Management Stations Configuring the NMSCommunities AppendixGateways IP AddressesSubnet Mask Routing and Filtering Problem TroubleshootingWhat are the symptoms? Installation SiteObtaining Technical Assistance If you are a consultantLimited Product Warranty Limited Product Warranty
Top Page Image Contents