Minuteman UPS SNMP-32 Series user manual Telnet Configuration

6. Telnet

6-1. Telnet Configuration

This section will guide you through the Telnet Configuration of the SNMP-32 Card.

1.Select “Start” from Windows, click “Run”, then input Telnet and the SNMP-32 card’s IP Address. Then click “OK” (Fig. 29).

Fig. 29-Telnet: Startup

2. Telnet connection successful (Fig. 30). Press any key to continue.

Fig. 30-Telnet: Connection

3.If you entered a User Name and a Password, enter them now. If you did not enter a User Name and a Password, hit enter (Fig. 31).

Fig. 31-Telnet: Login

21