Olitec RW400SG manual The Rear Panel

2.3.2 The Rear Panel

The rear panel contains the following features. (Viewed from left to right:)

¾Wireless antenna

¾Factory Default Reset button

¾There are two ways to reset the router's factory defaults:

1)Use the Factory Defaults function on System Tools ->Factory Defaults page in the router's Web-based Utility.

2)Use the Factory Default Reset button: First, turn off the router's power. Second, press and hold the default reset button then turn on the router's power, until the system LED lights up (about 3 seconds). Last, release the reset button and wait for the router to reboot.

Note: Ensure the router is powered on before it restarts completely.

¾WAN RJ45 port for connecting the router to a cable, DSL modem, or Ethernet

¾Four LAN 10/100Mbps RJ45 ports for connecting the router to the local PCs

¾AC power socket: only use the power adapter supplied with the RW400SG 108Mbps Wireless Router, use of a different adapter may result in product damage.

WAN 1 2 3 4

RESET

Figure 2-2: Rear Panel sketch

- 3 -