Printronix T5000e Series user manual Error Messages Message List Explanation Solution

			Error Messages
	Table 4. Message List
Message	Explanation		Solution
Poor scanning	Data validation failure:	1. Check that paper and
Inspect head	hardware defect. The		ribbon are clean,
	validator detected		unwrinkled, and
	unexpected dark spots in		installed correctly.
	spaces or light spots in bars.	2.	Clean the printhead.
	This usually indicates a poor
		3.	If message reappears,
	ribbon/media combination, a
	dirty printhead, or a burned		replace the printhead.
	pixel.
Speed Exceeds	Print Speed is set above 6	Change Print Speed in the
Validator Limit	IPS as the Power-Up	QUICK SETUP menu or via
	configuration with the	host software to 6 IPS or
	validator option installed. An	less when using the
	attempt was made to set Print	validator option and save
	Speed above 6 IPS in the	the new value as the
	QUICK SETUP menu or via	Power-Up configuration in
	host software.	the CONFIG CTRL menu.

67