Telstrat Argent manual Installing Dial-Up Network

Page 15

Argent Terminal Adaptor - User Guide

11. Click on Finish

12.Click on Properties

13. Set Maximum speed to 115200

14. Click on Close

Your ATA Modem is now installed

3.6.15 Installing Dial-Up Network

To Install Dial-Up Networking (DUN) and TCP/IP please refer to your Microsoft Installation Guide or your Internet Service Provider (ISP) for the latest configuration information.

Version 1.1	Telstra Corporation Limited
Page 15/29	ACN 051 775 556

Image 15

Contents Version Copyright 1999 Telstra Corporation Limited Table of Contents 24 Serial Port ‘AT’ Commands Description 3.1 Application IntroductionDefinitions Package ContentsPort Functions Back PanelDisplay Interpretation Top Panel Seven Segment DisplayConnect the Eftpos terminal to ATA ATA Activation InstructionsPrepare position Connect ATA to NT1Observe D-Channel X.25 Call Progress For the First Call Power-up the ATAAdjust the Display Orientation of the ATA Select the Required TEI NumberObserve for Configuration File Errors Observe the Software DownloadObserve for Failure to Connect Replace the ATA if Faulty on Arrival Observe that the ATA is ready and record the service detailsClick on Control Panel Point-to-Point Protocol PPP InstallationTick Don’t detect my modem I will select from list Installing Dial-Up Network Open Dial-Up Networking Double click on Make New Connection Configuring Dial-Up Networking DUN17 V.120 Setup Connect the Eftpos terminalEnd to end test ATA Maintenance Warranty ATA out of Warranty with Telstra Service Assurance Introduction ‘AT’ CommandsRegister Description Register settingsPots Telephone Supplementary Features 5.1 Introduction RSP Abbreviations used in the Pots feature descriptionsTelephone Port Pots Features Call Waiting CWMalicious Call Identification Mcid / MCT Call Line Presentation Clip Multiple Subscriber Number MSN Call ForwardOH DT #1# telephone number # RH