Telstrat Argent manual Table of Contents

Argent Terminal Adaptor - User Guide

Table of Contents

1	INTRODUCTION			5
2	SCOPE			5
3	DESCRIPTION			5
	3.1	Application		5
	3.2	Definitions		6
	3.3	Package Contents		6
	3.4	Back Panel		7
	3.5 Top Panel Seven Segment Display			8
	3.6	ATA Activation Instructions		9
	3.6.1		Prepare position	9
	3.6.2 Connect ATA to NT1			9
	3.6.3 Connect the EFTPOS terminal to ATA			9
	3.6.4		Power-up the ATA	10
	3.6.5 Adjust the Display Orientation of the ATA			10
	3.6.6 Select the Required TEI Number			10
	3.6.7 Observe D-Channel X.25 Call Progress For the First Call			10
	3.6.8 Observe D-Channel X.25 call Progress For the Second Call			10
	3.6.9 Observe the Software Download			11
	3.6.10		Observe for Configuration File Errors	11
	3.6.11		Observe for Failure to Connect	11
	3.6.12		Observe that the ATA is ready and record the service details	12
	3.6.13		Replace the ATA if Faulty on Arrival	12
	3.6.14		Point-to-Point Protocol (PPP) Installation	13
	3.6.15		Installing Dial-Up Network	15
	3.6.16		Configuring Dial-Up Networking (DUN)	16
	3.6.17		V.120 Setup	17
	3.6.18		Connect the EFTPOS terminal	17
	3.6.19		End to end test	17
	3.7	ATA Maintenance		18
	3.7.1 Check the Seven Segment display			18
	3.7.2 Check that the Power is On			18
	3.7.3		Restart the ATA	18
	3.7.4 Perform a Cold Reboot on the ATA			18
	3.7.5 Test the OnRamp® 2 D-channel X.25 facility			18
	3.7.6 Contact the Service Provider and Replace the ATA			18
	3.7.7		Maintenance by Telstra	19
	3.7.8 Customer Network Management (CNM)			19
	3.8	Warranty		19
	3.8.1 ATA faulty on arrival			19
	3.8.2 ATA under Warranty - with Telstra Service Assurance			19
	3.8.3 ATA under Warranty - without Telstra Service Assurance			19
	3.8.4 ATA out of Warranty - with Telstra Service Assurance			20

Version 1.1	Telstra Corporation Limited
Page 3/29	ACN 051 775 556