Argent Terminal Adaptor - User Guide
If you do not have access to a computer, you can enable CLIR on a permanent basis using the following handset commands:
a | Enable CLIR for the port to which the handset is | OH DT #8#1# RH |
| connected |
|
|
|
|
b | Disable CLIR for the port to which the handset is | OH DT #8#0# RH |
| connected |
|
|
|
|
c | Check if CLIR is enabled or disabled (double tone | OH DT #8#*# RH |
| indicates that CLIR is enabled; triple tone indicates that |
|
| CLIR is disabled) |
|
|
|
|
5.2.4Call Line Presentation (CLIP)
When CLIR is not in effect, the incoming call’s telephone number is stored in register S65 for Voice (telephone) calls and S67 for Data calls (see section 4.3) will be presented by the remote end initiating the call.
Version 1.1 | Telstra Corporation Limited |
Page 26/29 | ACN 051 775 556 |