Telstrat Argent manual Configuring Dial-Up Networking DUN

Page 16

Argent Terminal Adaptor - User Guide

3.6.16Configuring Dial-Up Networking (DUN)

1.Open My Computer from your Desktop

2.Open Dial-Up Networking

3.Double click on Make New Connection

4. Type in the name of your ISP

5.Select a device (Standard 33600 bps Modem)

6.Click Next

7. Type in the area code and telephone number of ISP dial-up number

Version 1.1	Telstra Corporation Limited
Page 16/29	ACN 051 775 556

Image 16

Contents Version Copyright 1999 Telstra Corporation Limited Table of Contents 24 Serial Port ‘AT’ Commands Introduction Description 3.1 ApplicationPackage Contents DefinitionsBack Panel Port FunctionsTop Panel Seven Segment Display Display InterpretationATA Activation Instructions Prepare positionConnect ATA to NT1 Connect the Eftpos terminal to ATAPower-up the ATA Adjust the Display Orientation of the ATASelect the Required TEI Number Observe D-Channel X.25 Call Progress For the First CallObserve the Software Download Observe for Configuration File ErrorsObserve for Failure to Connect Observe that the ATA is ready and record the service details Replace the ATA if Faulty on ArrivalPoint-to-Point Protocol PPP Installation Click on Control PanelTick Don’t detect my modem I will select from list Installing Dial-Up Network Configuring Dial-Up Networking DUN Open Dial-Up Networking Double click on Make New ConnectionConnect the Eftpos terminal 17 V.120 SetupEnd to end test ATA Maintenance Warranty ATA out of Warranty with Telstra Service Assurance ‘AT’ Commands IntroductionRegister settings Register DescriptionPots Telephone Supplementary Features 5.1 Introduction Abbreviations used in the Pots feature descriptions RSPCall Waiting CW Telephone Port Pots FeaturesMalicious Call Identification Mcid / MCT Call Line Presentation Clip Call Forward Multiple Subscriber Number MSNOH DT #1# telephone number # RH