Solid State Logic X-Logic Series Midi m1, Midi Remote Channel ck, Midi Remote Learn ck

X-Rack Installation and Operation

4.4.2MIDI (m1)

Under this menu it is possible to set the MIDI controls which can control parts of the X-Rack XR622 Master module and also to save and load all internal stores to and from a MIDI sequencer or librarian as a SysEx dump.

MIDI Remote Channel (ck)

Under the MIDI menu, use th e D-Pot to select MIDI Channel.

Then press the D-Pot and turn it to select the required channel (‘01’ to ‘16’ or ‘al’ for all/any channel). This is the MIDI channel that will

be used for remote control of the XR622 Master module. By default X-Rack will listen on all channels.

MIDI Remote Learn (ck)
Under the MI	DI men u, use the D-P ot t o s elect
				+
MIDI Learn (	le) an d p ress SAVE. T he gr een
‘Wr Prot’ LED will flash to indicate you are in MIDI
Learn mode. Operating any one of the ‘soft’ controls					SAVE
on the XR622 Master module will c ause the LED of
the selected control to flash (the module ‘ SEL’ LED
will flash if either of the potentiomenters have been chosen) – indicating it has been chosen. Assign a MIDI
controller t o the select ed fu nction by oper ating the required MIDI controller. To cancel or change the
assignment either operate the Master module control again, or operate a different control. A successful
assignment will be indicated by the flashing LED changing to just being illuminated steadily.
To exit MIDI Learn mode, press the D-Pot – the green ‘Wr Prot’ LED will stop flashing. Switch assignments
can be reset to the system defaults by pressing COPY/DEL when in MIDI Remote Learn mode; the ‘Empty’
LED indicating when the assignments have been deleted.
		Default MIDI Controller Mapping
		MIDI Controller	Master Module Control
		1	MIX
		2	REC
		3	EXT
		4	ALT
		5	MONO
		6	DIM
		7	CUT
		8	AFL Level
		9	Monitor LEVEL

MIDI Save and Load

In order to use t he MIDI save and l oad utility th e X-Rack must be conn ected to a c omputer running a suitable sequencer or MIDI librarian package.

All the stored setups can be saved as a Sy stem Exclusive dump to any software pac kage that supports MIDI SysEx dumps. In practice this includes most packages and you would normally save the TR setups to an additional track in your current DAW project so that your setups are sto red with the rest of the project.

Saving Setups to a Mac or PC (sa)

With the X-Rack in Setup Mode, saving TR setups to Mac or PC can be achieved as follows:

• Under the MIDI menu, use the D-Pot to select MIDI Save.

Page 11