Solid State Logic X-Logic Series owner manual Physical Specification, Environmental Specification

Page 23

				X-Rack Installation and Operation
5.3 Physical Specification *

			excluding front panel knob(s) and connectors
Depth:	180mm / 7.2 inches
Height:	255mm / 10.2 inches		including connectors, excluding front panel knob(s)
	178mm / 7 inches (4 RU)		excluding feet
Width:	440mm / 17.4 inches		excluding rack ears
Weight:	483mm / 19 inches		including rack ears
	2.8kg / 6.2 pounds		without modules fitted
	3.5kg /	7.7 pounds	with blank panels fitted
Power:	5.0kg /	11 pounds	with modules fitted
	50 Watts / 60VA		with 8 modules fitted
Boxed size:	540mm x 300mm x 270mm / 21.25" x 12" x 10.63"
Boxed weight:	4.3kg / 9.5 pounds		without modules fitted
	5.0kg /	11 pounds	with blank panels fitted
* All values are approximate6.5kg /		14.3 pounds	with modules fitted

5.4 Environmental Specification
Temperature	Operating:
	Non-operating:
Relative Humidity	Max. gradient:
Relative Humidity	Operating:
	Non-operating:
Vibration	Max. wet bulb:
Vibration	Operating:
Shock	Non-operating, power off:
Shock	Operating:
Altitude	Non-operating:
Altitude	Operating:
	Non-operating:

5 to 30 Deg. C –20 to 50 Deg. C

15 Deg. C/Hour

20 to 80 %

5 to 90 %

29 Deg. C (non-condensing) < 0.2 G (3 - 100Hz)

< 0.4 G (3 - 100Hz)

< 2 G (10mSec. Max.) < 10 G (10mSec. Max.)

0 to 3000m (above sea level)

0 to 12000m

Page 19

Image 23

Contents Page Page U N D V I S I O N Solid State LogicSolid State Logic Contents XLogic Introduction WarrantyWarranty Repairs Out of Warranty RepairsDefinitions Safety considerationsElectrical Safety Warning InstallationMains Isolation and Over-Current Protection Graphical SymbolsSafety Considerations Mains Supply and PhasesMounting Rack InstallationAssembling the X-Rack Connection Saving Stores to Internal Memory Stand-alone ModeExiting Display Mode Operation Total RecallRack Installation and Operation AWS Remote ModeOverview Setup/MIDI ModeNavigating in the Setup menu Option Display SettingMidi Remote Channel ck Default Midi Controller MappingSaving Setups to a Mac or PC sa Midi m1Remote Mode re Write Protect Mode prTest Pots tp Address Setting adTest Mode te Test LEDs tlSet DIM Level d1 Show Version veBefore continuing see System Requirements overleaf Software Download and InstallationAn be downloaded from Rack Internal Links and Fuses Rack Connector DetailsMiscellaneous Rack Connector Details Mix Bus Link Environmental Specification Physical SpecificationPage A-1 Rack Mic Amp ModuleMIC Section E Line Section FA-2 3 HF/LF Section GOutput Section H A-3 Measurement ConditionsMeasurement References Microphone Amplifier PerformanceA-4 Instrument Input PerformanceLine Input Performance A-5 A-6 Connector DetailsB-1 Rack EQ ModuleFrequency Sections B-2 HMF Band controls PerformanceCurves HF Band controlsB-4 LMF Band controlsLF Band controls LMF EQ Maximum Gain EQ AlignmentHF EQ Maximum Gain HMF EQ Maximum GainB-6 LF EQ Maximum Gain‘Balance’ Adaptor B-7 B-8 D-1 Rack Dynamics ModuleCompressor/Limiter Section Gate/Expander SectionD-2 D-3 Compressor/Limiter ControlsExpander/Gate Controls D-4 Dynamics AdjustmentsDistortion 7 ‘Balance’ Adaptor Compressor ThresholdCompressor Law Gate ThresholdD-6 Rack Line Return Module Line Return ModuleIntroduction OperationE-2 Line Input Performance Performance SpecificationMeasurement Conditions Measurement ReferencesE-4 Calibration InformationLine Input LineE-5 Connector DetailsLine Insert Send/ReturnE-6 Overall width front and rear panels are offsetF-1 Master ModuleRack Master Module Mix SectionMidi Remote Configuration Dim LevelMonitor Section ExpansionF-3 Default Midi Controller MappingLevel Compensation 600Ω Output Level CompensationF-4 Mix Bus PerformanceRecord Bus Performance Meter Level Mix Level TrackingF-6 Connector Details Ins Rtn, Ext, Mon, Alt MonHeadphones Ins Snd, Mix, Rec, Fol MonF-7 F-8