Socket Mobile 56K Modem Card manual Country code are correct. Tap on Dialing Patterns

Page 16

In the next screen, enter the settings appropriate for your telephone line.

If you DO NOT need to dial a number to use an external line, do the following:

a)In the Location: field, select Home. Make sure the Area code and Country code are correct. Tap ok.

Note: In most cases, users should select Home.

If you DO need to dial a number to use an external line (e.g., 9), do the following:

a)In the Location: field, select Work. Make sure the Area code and

Country code are correct. Tap on Dialing Patterns.

b)In the Dialing Patterns screen, enter the following settings, where: X represents the number for dial-out

Y represents the number for dial-out long distance

For local calls, dial: X,G

For long distance calls, dial: Y,1,FG (“1” for U.S.)

For international calls, dial: Y,011,EFG (“011” for U.S.)

c)Tap ok. In the Dialing Options screen, tap ok.

Note: The values for X and Y may be the same, as shown..

2.Now you are ready to connect to a telephone line. See STEP 6: Connect to a Telephone Line.

16 CHAPTER 2: SETUP FOR WINDOWS CE

Image 16
Contents 56K Modem Card Table of Contents Page Introduction OverviewPackage Contents Hardware FeaturesInstallation Steps Summary Setup for Windows CERegister Your Card Prepare Dial-up Information Install the Software Software InstallationSetup for Windows CE Set up the Dial-up Connection Insert the CardGo to Start Settings Connections. Tap on Modem Pocket PCEnter Dialing Settings Country code are correct. Tap on Dialing Patterns Go to Start Settings Connections. Tap on Connections Setup for Windows CE Enter Dialing Settings Country code are correct. Tap on Dialing Patterns Setup for Windows CE Select a modem Socket 56K Modem or Socket-CF+ 56KModem Baud rate Wait for dial tone before dialing Checked Configure… Handheld PC DevicesPort Settings, in the Baud Rate field, select 57600. Tap on Enter Dialing Properties Setup for Windows CE Connect to a Telephone Line Dial and ConnectEnding a Data Call Start Settings Connections ConnectMethod 1 Tap on the Connection icon Setup for Windows CE Method 2 Dial automatically from your application Ending a Data Call Go to Start Programs Communication Remote Networking Optional Set up the Card for Your Country Optional Check Connection Time Pocket PC 2000/2002 and HPC DevicesSetup for Casio BE-300 Install the Software Setup for Casio BE-300 Plug the card directly into a CompactFlash I/O slot Dial-up Selected Go to Main Connections. Tap on New Setting…Speed Select 57600 bps Wait for tone Checked Connect to a Telephone Line Ending a Data Call Go to Main WhereAreYou? Optional Set up Advanced Networking Setup for Windows 95/98/Me/2000/XP Insert the Card Install the Drivers NextSet up Your Dial-up Connection Select a device Select Standard Pcmcia Card ModemConnect to a Telephone Line Optional Set up Advanced Networking Properties Appendix a Specifications With CompactFlash-to-PC Card adapterAppendix B Network Information Network Information FormTechnical Support Appendix C Support ResourcesLive Technical Support Users’ Forum Limited Warranty Limited Software Warranty Copyright Notice Socket Communications, Inc