Socket Mobile 56K Modem Card manual Handheld PC Devices

Handheld PC Devices

1.After setting up the dial-up connection in Step 5, you will already be in the Dial-Up Connection screen.

To access this screen at any time, follow these steps:

•Go to Start Programs Communication Remote Networking.

•Tap on the icon for the modem connection you created in Step 5.

2.In the next screen, verify the connection information.

3.For some mobile computers, you must modify the dial properties. For instructions, refer to the mobile computer’s user manual.

4.Tap Connect. Call status screens will appear, and the Power and Data Status LEDs will blink.

5.After the status screen reports that you have Connected, two connection icons will appear:

Connection icon: (Task tray at bottom of screen)

Indicates an active dial-up or network connection

Modem status icon: (Task tray at bottom of screen)

GREEN — connected RED — data transmitting

When the HPC is connected, the Link and Power Status LEDs will stay on, and the Data Status LED will blink during data transmission.

Ending a Data Call

1.Tap on the connection icon in the task tray:

2.In the status screen, tap Disconnect. After the mobile computer disconnects, the task tray icon will disappear from your screen. All LEDs may turn off, depending on your device.

CHAPTER 2: SETUP FOR WINDOWS CE 31