Socket Mobile 56K Modem Card manual Set up Your Dial-up Connection

Page 46

STEP 5: Set up Your Dial-up Connection

To set up your dial-up connection, use the network connection wizard included with Windows.

1.Windows 95/98 — Go to My Computer Dial-Up Networking Make New Connection.

Windows Me — Go to My Computer Control Panel Dial-Up Networking Make New Connection.

Windows 2000 — Go to Start Settings Control Panel Network and Dial-Up Connections Make New Connection.

Windows XP — Go to Start Control Panel Network Connections Create a New Connection.

2.Follow the wizard to set up a connection, making the following selections as prompted:

• Select a device: Select Standard PCMCIA Card Modem.

•Telephone number: Enter the dial-up number of your office network/ISP.

46 CHAPTER 4: SETUP FOR WINDOWS 95/98/Me/2000/XP

Image 46

Contents 56K Modem Card Table of Contents Page Introduction OverviewPackage Contents Hardware FeaturesInstallation Steps Summary Setup for Windows CERegister Your Card Prepare Dial-up Information Install the Software Software InstallationSetup for Windows CE Set up the Dial-up Connection Insert the CardGo to Start Settings Connections. Tap on Modem Pocket PCEnter Dialing Settings Country code are correct. Tap on Dialing Patterns Go to Start Settings Connections. Tap on Connections Setup for Windows CE Enter Dialing Settings Country code are correct. Tap on Dialing Patterns Setup for Windows CE Select a modem Socket 56K Modem or Socket-CF+ 56KModem Baud rate Wait for dial tone before dialing Checked Configure… Handheld PC DevicesPort Settings, in the Baud Rate field, select 57600. Tap on Enter Dialing Properties Setup for Windows CE Connect to a Telephone Line Dial and ConnectEnding a Data Call Start Settings Connections ConnectMethod 1 Tap on the Connection icon Setup for Windows CE Method 2 Dial automatically from your application Ending a Data Call Go to Start Programs Communication Remote Networking Optional Set up the Card for Your Country Optional Check Connection Time Pocket PC 2000/2002 and HPC DevicesSetup for Casio BE-300 Install the Software Setup for Casio BE-300 Plug the card directly into a CompactFlash I/O slot Dial-up Selected Go to Main Connections. Tap on New Setting…Speed Select 57600 bps Wait for tone Checked Connect to a Telephone Line Ending a Data Call Go to Main WhereAreYou? Optional Set up Advanced Networking Setup for Windows 95/98/Me/2000/XP Insert the Card Install the Drivers NextSet up Your Dial-up Connection Select a device Select Standard Pcmcia Card ModemConnect to a Telephone Line Optional Set up Advanced Networking Properties Appendix a Specifications With CompactFlash-to-PC Card adapterAppendix B Network Information Network Information FormTechnical Support Appendix C Support ResourcesLive Technical Support Users’ Forum Limited Warranty Limited Software Warranty Copyright Notice Socket Communications, Inc