Socket Mobile 56K Modem Card manual Connect to a Telephone Line

Page 39

STEP 6: Connect to a Telephone Line

With the card still in your mobile computer, connect to an analog telephone line.

STEP 7: Dial and Connect!

1.After setting up your dial-up connection in Step 5, your new connection should be listed in the Connections screen. Select your modem connection, then tap Connect.

2.In the Dial-up Connect screen, verify the phone number. Tap Connect.

3.A series of screens will appear, reporting the status of your call. The Power and Data Status LEDs will blink.

4.When your device has connected, it will report Connected. Two icons will also appear at the bottom of your screen.

Connection status icon: indicates active remote networking connection

Modem status icon:
GREEN — connected	RED — data transmitting

When your device has connected, the Link and Power Status LEDs will stay on, and the Data Status LED will flash during data transmission.

CHAPTER 3: SETUP FOR CASIO BE-300 39

Image 39

Contents 56K Modem Card Table of Contents Page Overview IntroductionHardware Features Package ContentsSetup for Windows CE Installation Steps SummaryRegister Your Card Prepare Dial-up Information Software Installation Install the SoftwareSetup for Windows CE Insert the Card Set up the Dial-up ConnectionPocket PC Go to Start Settings Connections. Tap on ModemEnter Dialing Settings Country code are correct. Tap on Dialing Patterns Go to Start Settings Connections. Tap on Connections Setup for Windows CE Enter Dialing Settings Country code are correct. Tap on Dialing Patterns Setup for Windows CE Select a modem Socket 56K Modem or Socket-CF+ 56KModem Baud rate Wait for dial tone before dialing Checked Handheld PC Devices Configure…Port Settings, in the Baud Rate field, select 57600. Tap on Enter Dialing Properties Setup for Windows CE Dial and Connect Connect to a Telephone LineEnding a Data Call Connect Start Settings ConnectionsMethod 1 Tap on the Connection icon Setup for Windows CE Method 2 Dial automatically from your application Ending a Data Call Go to Start Programs Communication Remote Networking Optional Set up the Card for Your Country Pocket PC 2000/2002 and HPC Devices Optional Check Connection TimeSetup for Casio BE-300 Install the Software Setup for Casio BE-300 Plug the card directly into a CompactFlash I/O slot Go to Main Connections. Tap on New Setting… Dial-up SelectedSpeed Select 57600 bps Wait for tone Checked Connect to a Telephone Line Ending a Data Call Go to Main WhereAreYou? Optional Set up Advanced Networking Setup for Windows 95/98/Me/2000/XP Insert the Card Next Install the DriversSelect a device Select Standard Pcmcia Card Modem Set up Your Dial-up ConnectionConnect to a Telephone Line Optional Set up Advanced Networking Properties With CompactFlash-to-PC Card adapter Appendix a SpecificationsNetwork Information Form Appendix B Network InformationAppendix C Support Resources Technical SupportLive Technical Support Users’ Forum Limited Warranty Limited Software Warranty Socket Communications, Inc Copyright Notice