Socket Mobile 56K Modem Card Appendix a Specifications, With CompactFlash-to-PC Card adapter

Page 50

Appendix A Specifications

Physical Characteristics: CF I/O Card Size: 88 x 42.8 x 14.8 mm

Power Consumption (DC 3.3V): Active: 119 mA Inctive: 13 mA

Interface Standards:

CompactFlash Interface: CompactFlash I/O, Type I Extended

With CompactFlash-to-PC Card Adapter: PCMCIA, Type II

Serial Communications: TTL

Transmit Speed: Up to 33.6 Kbps

Receive Speed: Up to 56 Kbps

Data Modulation: ITU V.90, 56Kflex

Fax: Send/receive 14.4 Kbps ITU-T V.17, V.24, V.27 + err, V.21 Channel 2

Error Correction: MNP Levels 2-4 ITU V.42

Data Compression: MNP Level 5 ITU V.42

Line Requirement: Public Switched Telephone Network (PSTN)

Receiver Sensitivity: 0-43 dBm

Hardware Compatibility:

Standard Card (without PC Card adapter):

Pocket PC 2000/2002/2003, Handheld PC Pro and Handheld PC 2000 with CompactFlash I/O slot.

Casio BE-300 Cassiopeia Pocket Manager.

With CompactFlash-to-PC Card adapter:

Pocket PC 2000/2002/2003, Handheld PC Pro and Handheld PC 2000 with PC Card slot.

Windows 950B/98/98SE/Me/2000/XP notebook with Cardbus.

For information on Sharp Zaurus compatibility, please visit: www.socketcom.com/ZaurusSharp.asp

Software Included: Socket 56K Modem Installation CD

Warranty: CompactFlash Card: Three years

Certification:

FCC: Part 15, Class B

CE: ET91B-06-030

JATE ID: A02-00HJP

Telecom Approval: FCC: Part 68, CTR 21

50 APPENDIX A: SPECIFICATIONS

Image 50

Contents 56K Modem Card Table of Contents Page Introduction OverviewPackage Contents Hardware FeaturesRegister Your Card Prepare Dial-up Information Setup for Windows CEInstallation Steps Summary Install the Software Software InstallationSetup for Windows CE Set up the Dial-up Connection Insert the CardGo to Start Settings Connections. Tap on Modem Pocket PCEnter Dialing Settings Country code are correct. Tap on Dialing Patterns Go to Start Settings Connections. Tap on Connections Setup for Windows CE Enter Dialing Settings Country code are correct. Tap on Dialing Patterns Setup for Windows CE Select a modem Socket 56K Modem or Socket-CF+ 56KModem Baud rate Wait for dial tone before dialing Checked Configure… Handheld PC DevicesPort Settings, in the Baud Rate field, select 57600. Tap on Enter Dialing Properties Setup for Windows CE Connect to a Telephone Line Dial and ConnectEnding a Data Call Start Settings Connections ConnectMethod 1 Tap on the Connection icon Setup for Windows CE Method 2 Dial automatically from your application Ending a Data Call Go to Start Programs Communication Remote Networking Optional Set up the Card for Your Country Optional Check Connection Time Pocket PC 2000/2002 and HPC DevicesSetup for Casio BE-300 Install the Software Setup for Casio BE-300 Plug the card directly into a CompactFlash I/O slot Speed Select 57600 bps Wait for tone Checked Go to Main Connections. Tap on New Setting…Dial-up Selected Connect to a Telephone Line Ending a Data Call Go to Main WhereAreYou? Optional Set up Advanced Networking Setup for Windows 95/98/Me/2000/XP Insert the Card Install the Drivers NextSet up Your Dial-up Connection Select a device Select Standard Pcmcia Card ModemConnect to a Telephone Line Optional Set up Advanced Networking Properties Appendix a Specifications With CompactFlash-to-PC Card adapterAppendix B Network Information Network Information FormLive Technical Support Appendix C Support ResourcesTechnical Support Users’ Forum Limited Warranty Limited Software Warranty Copyright Notice Socket Communications, Inc