Socket Mobile 56K Modem Card manual Port Settings, in the Baud Rate field, select 57600. Tap on

Page 21

4.In Port Settings, in the Baud Rate field, select 57600. Tap on the

Call Options tab.

5.Make sure Wait for dial tone before dialing is checked. Tap OK.

6.The Make New Dial-Up Connection screen will appear.

If you DO NOT need to enter any IP addresses, tap Next>.

If you DO need to enter IP addresses, tap TCP/IP Settings. Use the General and Name Servers screens to enter any necessary IP addresses. Tap OK. In the next screen, tap Next>.

7.In the next screen, enter the phone number of your office network or ISP. Tap Finish.

Important! Be sure to enter the Country code, Area code, and Telephone number!

CHAPTER 2: SETUP FOR WINDOWS CE 21

Image 21

Contents 56K Modem Card Table of Contents Page Overview IntroductionHardware Features Package ContentsSetup for Windows CE Installation Steps SummaryRegister Your Card Prepare Dial-up Information Software Installation Install the SoftwareSetup for Windows CE Insert the Card Set up the Dial-up ConnectionPocket PC Go to Start Settings Connections. Tap on ModemEnter Dialing Settings Country code are correct. Tap on Dialing Patterns Go to Start Settings Connections. Tap on Connections Setup for Windows CE Enter Dialing Settings Country code are correct. Tap on Dialing Patterns Setup for Windows CE Select a modem Socket 56K Modem or Socket-CF+ 56KModem Baud rate Wait for dial tone before dialing Checked Handheld PC Devices Configure…Port Settings, in the Baud Rate field, select 57600. Tap on Enter Dialing Properties Setup for Windows CE Dial and Connect Connect to a Telephone LineEnding a Data Call Connect Start Settings ConnectionsMethod 1 Tap on the Connection icon Setup for Windows CE Method 2 Dial automatically from your application Ending a Data Call Go to Start Programs Communication Remote Networking Optional Set up the Card for Your Country Pocket PC 2000/2002 and HPC Devices Optional Check Connection TimeSetup for Casio BE-300 Install the Software Setup for Casio BE-300 Plug the card directly into a CompactFlash I/O slot Go to Main Connections. Tap on New Setting… Dial-up SelectedSpeed Select 57600 bps Wait for tone Checked Connect to a Telephone Line Ending a Data Call Go to Main WhereAreYou? Optional Set up Advanced Networking Setup for Windows 95/98/Me/2000/XP Insert the Card Next Install the DriversSelect a device Select Standard Pcmcia Card Modem Set up Your Dial-up ConnectionConnect to a Telephone Line Optional Set up Advanced Networking Properties With CompactFlash-to-PC Card adapter Appendix a SpecificationsNetwork Information Form Appendix B Network InformationAppendix C Support Resources Technical SupportLive Technical Support Users’ Forum Limited Warranty Limited Software Warranty Socket Communications, Inc Copyright Notice