Socket Mobile 56K Modem Card manual Setup for Windows CE

Page 8

4.The Setup Center will appear in your browser. Follow the instructions on your screen to install the software for Windows CE.

5.When the File Download screen appears, click Open. Do NOT click Save!

6.The Setup program for WhereAreYou? Software will appear. Follow the instructions on your screen until installation is complete.

7.When installation is complete, disconnect the mobile computer from the host PC. Soft reset the mobile computer by pressing the reset button.

Important! Make sure you soft reset your mobile computer by pressing the reset button!

Pocket PC 2003 only: Do not soft reset the device when a Socket card is inserted, or application errors may occur. If errors occur, remove the card and soft reset the device. Wait for the device reset to finish before you re-insert the card.

8 CHAPTER 2: SETUP FOR WINDOWS CE

Image 8

Contents 56K Modem Card Table of Contents Page Introduction OverviewPackage Contents Hardware FeaturesRegister Your Card Prepare Dial-up Information Setup for Windows CEInstallation Steps Summary Install the Software Software InstallationSetup for Windows CE Set up the Dial-up Connection Insert the CardGo to Start Settings Connections. Tap on Modem Pocket PCEnter Dialing Settings Country code are correct. Tap on Dialing Patterns Go to Start Settings Connections. Tap on Connections Setup for Windows CE Enter Dialing Settings Country code are correct. Tap on Dialing Patterns Setup for Windows CE Select a modem Socket 56K Modem or Socket-CF+ 56KModem Baud rate Wait for dial tone before dialing Checked Configure… Handheld PC DevicesPort Settings, in the Baud Rate field, select 57600. Tap on Enter Dialing Properties Setup for Windows CE Connect to a Telephone Line Dial and ConnectEnding a Data Call Start Settings Connections ConnectMethod 1 Tap on the Connection icon Setup for Windows CE Method 2 Dial automatically from your application Ending a Data Call Go to Start Programs Communication Remote Networking Optional Set up the Card for Your Country Optional Check Connection Time Pocket PC 2000/2002 and HPC DevicesSetup for Casio BE-300 Install the Software Setup for Casio BE-300 Plug the card directly into a CompactFlash I/O slot Speed Select 57600 bps Wait for tone Checked Go to Main Connections. Tap on New Setting…Dial-up Selected Connect to a Telephone Line Ending a Data Call Go to Main WhereAreYou? Optional Set up Advanced Networking Setup for Windows 95/98/Me/2000/XP Insert the Card Install the Drivers NextSet up Your Dial-up Connection Select a device Select Standard Pcmcia Card ModemConnect to a Telephone Line Optional Set up Advanced Networking Properties Appendix a Specifications With CompactFlash-to-PC Card adapterAppendix B Network Information Network Information FormLive Technical Support Appendix C Support ResourcesTechnical Support Users’ Forum Limited Warranty Limited Software Warranty Copyright Notice Socket Communications, Inc