Socket Mobile 56K Modem Card manual Insert the Card, Set up the Dial-up Connection

Page 9

STEP 4: Insert the Card

Note: If you installed Socket’s WhereAreYou? software, you may want to use it now to set up the modem card for your country. You must start this process BEFORE inserting the card. For instructions, go to page 32.

Insert the 56K Modem Card into your mobile computer, with the gray label on top. If using a PC Card slot, first plug the card into a CompactFlash-to- PC Card adapter.

Plug the card directly into a CompactFlash I/O slot.

OR

Insert card into an adapter for use in a PC Card slot.

Warning! Do NOT insert the card upside down, or damage may occur!

When you insert the card, the Power and Data Status LEDs will blink then turn off.

STEP 5: Set up the Dial-up Connection

The process for setting up a dial-up connection differs between Pocket PC 2000/2002/2003, and Handheld PC devices. In the following pages, find the instructions for your specific type of Windows CE-based mobile computer.

You will need your dial-up information for this step. For most devices, this step involves two separate parts: making a new connection and entering the dialing settings.

CHAPTER 2: SETUP FOR WINDOWS CE 9

Image 9

Contents 56K Modem Card Table of Contents Page Overview IntroductionHardware Features Package Contents Setup for Windows CE Installation Steps Summary Register Your Card Prepare Dial-up Information Software Installation Install the SoftwareSetup for Windows CE Insert the Card Set up the Dial-up ConnectionPocket PC Go to Start Settings Connections. Tap on ModemEnter Dialing Settings Country code are correct. Tap on Dialing Patterns Go to Start Settings Connections. Tap on Connections Setup for Windows CE Enter Dialing Settings Country code are correct. Tap on Dialing Patterns Setup for Windows CE Select a modem Socket 56K Modem or Socket-CF+ 56KModem Baud rate Wait for dial tone before dialing Checked Handheld PC Devices Configure…Port Settings, in the Baud Rate field, select 57600. Tap on Enter Dialing Properties Setup for Windows CE Dial and Connect Connect to a Telephone LineEnding a Data Call Connect Start Settings ConnectionsMethod 1 Tap on the Connection icon Setup for Windows CE Method 2 Dial automatically from your application Ending a Data Call Go to Start Programs Communication Remote Networking Optional Set up the Card for Your Country Pocket PC 2000/2002 and HPC Devices Optional Check Connection TimeSetup for Casio BE-300 Install the Software Setup for Casio BE-300 Plug the card directly into a CompactFlash I/O slot Go to Main Connections. Tap on New Setting… Dial-up SelectedSpeed Select 57600 bps Wait for tone Checked Connect to a Telephone Line Ending a Data Call Go to Main WhereAreYou? Optional Set up Advanced Networking Setup for Windows 95/98/Me/2000/XP Insert the Card Next Install the DriversSelect a device Select Standard Pcmcia Card Modem Set up Your Dial-up ConnectionConnect to a Telephone Line Optional Set up Advanced Networking Properties With CompactFlash-to-PC Card adapter Appendix a SpecificationsNetwork Information Form Appendix B Network InformationAppendix C Support Resources Technical SupportLive Technical Support Users’ Forum Limited Warranty Limited Software Warranty Socket Communications, Inc Copyright Notice