Socket Mobile 56K Modem Card manual Go to Main Connections. Tap on New Setting…, Dial-up Selected

Page 38

STEP 5: Set up the Dial-up Connection

You will need your dial-up information for this step. Unlike for other device types, you do NOT need to enter any dialing settings for the Casio BE-300.

1.Go to Main Connections. Tap on New Setting…

2.In the next screen, enter the following settings:

•Connection name: Enter a name, such as “Socket 56K Modem CF.”

•A Mail/Internet application: Unchecked recommended. Otherwise consult your BE-300 documentation.

•Dial-up: Selected

After entering these settings, tap !

3.In the next screen, enter your Phone number, Connection ID (this is the same as your user name), and Password. Then tap !

4.In the next screen, make the following selections, then tap Finish.

•Modem: Select the Socket 56K Modem

•Speed: Select 57600 bps

•Wait for tone: Checked

38 CHAPTER 3: SETUP FOR CASIO BE-300

Page 37 Page 39
Image 38
Page 37 Page 39
Contents 56K Modem Card Table of Contents Page Introduction OverviewPackage Contents Hardware FeaturesRegister Your Card Prepare Dial-up Information Setup for Windows CEInstallation Steps Summary Install the Software Software InstallationSetup for Windows CE Set up the Dial-up Connection Insert the CardGo to Start Settings Connections. Tap on Modem Pocket PCEnter Dialing Settings Country code are correct. Tap on Dialing Patterns Go to Start Settings Connections. Tap on Connections Setup for Windows CE Enter Dialing Settings Country code are correct. Tap on Dialing Patterns Setup for Windows CE Select a modem Socket 56K Modem or Socket-CF+ 56KModem Baud rate Wait for dial tone before dialing Checked Configure… Handheld PC DevicesPort Settings, in the Baud Rate field, select 57600. Tap on Enter Dialing Properties Setup for Windows CE Connect to a Telephone Line Dial and ConnectEnding a Data Call Start Settings Connections ConnectMethod 1 Tap on the Connection icon Setup for Windows CE Method 2 Dial automatically from your application Ending a Data Call Go to Start Programs Communication Remote Networking Optional Set up the Card for Your Country Optional Check Connection Time Pocket PC 2000/2002 and HPC DevicesSetup for Casio BE-300 Install the Software Setup for Casio BE-300 Plug the card directly into a CompactFlash I/O slot Speed Select 57600 bps Wait for tone Checked Go to Main Connections. Tap on New Setting…Dial-up Selected Connect to a Telephone Line Ending a Data Call Go to Main WhereAreYou? Optional Set up Advanced Networking Setup for Windows 95/98/Me/2000/XP Insert the Card Install the Drivers NextSet up Your Dial-up Connection Select a device Select Standard Pcmcia Card ModemConnect to a Telephone Line Optional Set up Advanced Networking Properties Appendix a Specifications With CompactFlash-to-PC Card adapterAppendix B Network Information Network Information FormLive Technical Support Appendix C Support ResourcesTechnical Support Users’ Forum Limited Warranty Limited Software Warranty Copyright Notice Socket Communications, Inc
Top Page Image Contents