| ©Copyright |
SDIO Simplified Specification Version 2.00 | |
| Appendix C |
C.1 Abbreviations and Terms | |
3C | The original 3 companies that established the SDA and the SD card |
| specification |
ACMD | Application CommanD An additional set of commands created to support SD |
| specific requirements. |
Block | A number of bytes, basic data transfer unit |
CCCR | Common Card Control Registers |
CD | Connect/Disconnect |
CIA | Common Information Area |
CID | Card IDentification number register |
CIS | Card Information Structure |
CLK | Clock signal |
CMD | Command line or SD bus command (if extended CMDXX) |
Combo Card | A card that includes both SDIO and SD memory |
CRC | Cyclic Redundancy Check |
CS | Chip or Card Select |
CSA | Code Storage Area |
CSD | Card Specific Data register |
DAT[x] | Data line where x is in the range of 0 to 3 |
DSR | Driver Stage Register |
ECC | Error Correction Code |
Embedded SDIO | I/O or combo devices that are embedded in a host device that utilize the SDIO |
| electrical and command interface, but are not intended to be removed. |
EMI | |
ESC | External Signal Contacts |
ESD | |
FAT | File Allocation Table |
FBR | Function Basic Registers |
FIFO | First |
Flash | A type of multiple time programmable non volatile memory |
A SDIO card with physical dimensions based on SD Physical Specification | |
| Version 1.01 |
Function | An I/O device contained within an SDIO card |
A SDIO device that requires up to 500 mA rather than the standard 200 mA | |
| allowed for a |
A | |
Interrupt | A signal from the SDIO device to the host signaling the need for attention |
Interrupt Period | The times that a card may generate an interrupt signal on the SD bus |
Legacy Slot | SD Slot that supports only the SD Physical Specification Version 1.01 |
62