Savin 4018d, 4015 If Your Machine Does Not Operate As You Want, When a Message Is Displayed

Page 47

KirC2_ENcopyF_FM.book Page 39 Monday, September 22, 2003 11:36 AM

3. Troubleshooting

If Your Machine Does Not Operate As You Want

When a Message Is Displayed

The following chart contains explanations for common messages. If other mes- sages appear, follow the instructions as they are displayed.

Note

❒For messages not listed here, see General Settings Guide.

Message

Causes

Solutions

 

 

 

Cannot detect original

Improper original is

Select paper manually, not

size

placed. See p.17 “Sizes

with the Auto Paper Select

 

difficult to detect”.

function, and do not use the

 

 

Auto Reduce/Enlarge func-

 

 

tion.

 

 

 

 

 

Input the both horizontal and

 

 

vertical sizes of the non-stan-

 

 

dard original.

 

 

 

 

 

Place the original on the expo-

 

 

sure glass. See p.18 “Placing

 

 

Originals on the Exposure

 

 

Glass” .

 

 

 

 

Original is not placed.

Place your originals.

 

 

 

Check original orienta-

Original is not placed

Change original orientation.

tion

in the proper orienta-

 

 

tion.

 

 

 

 

Check paper size

Improper paper size is

If you press the {Start} key,

 

set.

copy will start onto the select-

 

 

ed paper.

 

 

 

Rotate Sort is unavail-

A size of paper for

Select a proper paper size. See

able with this paper size

which Rotate Sort is

p.30 “Sort”.

 

not available is select-

 

 

ed.

 

 

 

 

Cannot dup. copy this

A paper size not avail-

The following paper sizes are

size

able with the Duplex

available for the Duplex func-

 

function has been se-

tion: 11"⋅17"L, 81/2"⋅14" L

 

lected.

and 81/2"⋅11"KL. Select one

 

 

of these sizes.

 

 

 

Max. number of sets is *

The number of copies

You can change the maximum

 

exceeds maximum

copy quantity. See p.54 “Max.

 

copy quantity.

Number of Sets” .

 

 

 

39

Page 46 Page 48
Image 47
Page 46 Page 48
Contents Copy Reference Introduction Manuals for This Machine Other manuals Manuals for DeskTopBinder V2 LiteManuals for ScanRouter V2 Lite Table of Contents If Your Machine Does Not Operate As You Want Accessing User Tools Copier FeaturesSettings You Can Change with User Tools Dos and Donts Where to Put Your MachineCombination Chart Supplementary Information SpecificationsPage Page Remarque concernant les utilisateurs au Canada Avertissement Names of Major Options How to Read This ManualSymbols Safety During Operation Safety InformationPage AAI029S Machine Types Copier only Options fully installedControl Panel Lighter and Darker Cancel keyCombine/Series key Sort keyInitial copy display Reading the Display and Using KeysDisplay Scroll keys Operation switch right side of the control panel Turning On the PowerTurning On the Main Power Turning On the PowerTurning Off the Main Power Turning Off the PowerSaving Energy Auto Off/ Low PowerInch version Sizes and Weights of Recommended OriginalsOriginals Metric versionSizes Detectable with Auto Paper Select Sizes difficult to detect Missing Image AreaExposure glass ADF or ArdfPlacing Originals on the Exposure Glass Placing OriginalsOriginal Orientation Limit mark Document guide ArdfPlacing custom size originals To clear an entered value Basic ProcedureTo switch between pages or select functions To stop the machine during a multi- copy runPaper guide release lever Copying from the Bypass TrayOpen the bypass tray Push up the paper guide release leverPull down the paper guide release the lever step B Select Paper Size using U or T, and then press the OK keySelect Regular Size using U or T, and then press the OK key Horizontal size Vertical size Extender Paper guidesThen press the OK Select Paper Size using U orSelect Custom Size using U or T, and then press the OK key FeedsSelect Thick Paper using U or T, and then press the OK key Selecting Copy Paper Adjusting Image DensitySelecting Original Type Setting Copier FunctionsMake sure Auto Paper Select is se- lected Preset Reduce/EnlargeSelect the paper tray or bypass tray using U or T Press Reduce or Enlarge ZoomBase Point Press the OK key Adjust the ratio using U or TAuto Reduce/Enlarge Enter the ratioSort SortRotate Sort Select Sort or Rotate Sort, and then press the OK key Duplex Type 3 onlySided → 2 Sided Sided → 2 Sided Optional Ardf is requiredPress the Duplex key Original orientation and completed copiesSided 1 Page → Combine 1 Side Optional Ardf is required One-Sided CombineSided 2 Pages → Combine 1 Side Sided 4 Pages → Combine 1 SideOrientation of the original and image Optional Ardf is requiredPosition of combine Sided 2 Pages → Combine 1 SideSided 4 Pages → Combine 2 Side Two-Sided Combine Type 3 onlySided 8 Pages → Combine 2 Side Sided 4 Pages → Combine 2 Side Optional Ardf is requiredThen press the OK key Top or Top to Bottom using U orPress the Combine/Series key Series CopiesSided→1 Sided Optional Ardf is required Book→1 SidedPlace your original, and then press the Start key Select the paper tray using U or TIf Your Machine Does Not Operate As You Want When a Message Is DisplayedIf You Cannot Make Clear Copies Problem Causes SolutionsCombine If You Cannot Make Copies As You WantBasic EditDuplex Type 3 only When Memory Is FullPush the paper tray in, until it stops Loading PaperLoading Paper Original Orientation Orientation-Fixed Paper or Two-Sided PaperLoaded paper orientation For MFP Used Toner Adding TonerHandling Toner Toner StorageRemoving Toner Inserting Toner Troubleshooting Press the User Tools/Counter key Accessing User Tools Copier FeaturesChanging Default Settings Change is made, and the ma- chine is ready to copy Quitting User ToolsAPS/ Auto R/E Priority Settings You Can Change with User ToolsAuto Tray Switching Original Type SettingOriginal Count Display Duplex Mode PriorityOrientation Max. Number of SetsRotate Sort Preset R/E PriorityLetterhead Setting Duplex MarginUser Tools Copier Features Dos and Donts RemarksEnvironments to avoid Where to Put Your MachineMachine Environment Optimum environmental conditionsMoving Power ConnectionAccess to the Machine Cleaning the machine Cleaning the Exposure GlassCleaning the Exposure Glass Cover Cleaning the ADF or ArdfRemarks Combination Chart SpecificationsBypass Tray Copy Preset Enlarge/ReduceSupplementary Information Sort, Rotate Sort ZoomDuplex Margin Type 3 only Index Combine, 34 orientation Orientation and completed copies Adding Handling Inserting Removing Storage Used Memo Means Power on EN USA B121-6607
Top Page Image Contents