SPEED KEY
COUNT KEY
KEYPAD LOCK
LIGHT KEY
NUMERIC
KEYPAD
Bank
1
2
3
4
5
6
7
8
9
10
SFT[.]
(SHIFT) KEY
Press rSPD] to select the scanning speed, normar or Turbo Scan. (In Turbo Scan Mode, "TURBO" appears next to "SCAN" on the display.) At normal speed, the scanner scans 16 to 20 channels per second. In Turbo speed, the scanner scans nearly 100 channels per second.
Use [CNT] to indicate the number of times the scanner stopped on a channel during its last scan. First press [MANUAL] to stop scanning. Then press [CNT]. (In Count Mode, "COUNT" appears on the display.)
Turn the RotaryTuner (with [C/F/L] selector set to "C") or press [MANUAL]to display each channel and number count.
Press and hold [LCK] for 2 seconds to turn the keypad ON or oF1=. "KEYLOCK" appears
on the display when the keypad is disabled.
Use this key to avoid any accidental key entries.
Press [LHT] to turn the display light ON for 15 seconds. Press [LHT] again to manually turn the light OFF.
Use these keys to program a channel for scanning. Also use to access a channel
directly with [MANUAL]. During Scan Mode, use these keys to select or deselect
any of the 20 memory banks. (Only the selected bank indicator(s) appear on the
display.) Note: Youcannotdeactivateall20 banks.
Channel Bank Channel
1 - 2011 201 - 220
21 - 4012 221 - 240
41 - 6013 241 - 260
61 - 8014 261 - 280
81
101 - 120 16 301 - 320
121 - 140 17 321 - 340
141 - 160 18 341 - 360
161 - 180 19 361 - 380
181 - 200 20 381 - 400
This key has several functions: (a) During
scanning,enter bankpressnum['l erwithfroma numeric11 - 20. keyFor to
examle, to select Bank 13, ress ]3]. To se ect Bank 20, press [.] 0]; (b ress this ket twice to clear a number you entered
during programming; )Press this key twice to reset the num er count in Count
Mode.
I
.
9