Uniden USC 2500XL T manual ~nother Open Channel, Display. In this case, select another bank

Page 23

Select the bank(s) to be programmed. The indicators of the selected banks stop flashing.

Note: If the selected bank is full, that is, all 20

channels are programmed, "FULL:'appears on the

display. In this case, select another bank.

Press [SRC] to start programming.

On the display, only the indicators of the selected banks remain. The indicator of the bank currently being programmed starts blinking. The channel currently being stored is also displayed.

Note: During AUTO STORE, the search does not stop

on any active channel. You will not hear any audio, and no duplicate frequency will be stored.

TO STORE stops automatically when all available channels

.he selected banks are stored. "FuLL:' appears, and the last :mnel stored is displayed.

stop AUTO STORE manually, press [HLD], [MANUAL], [AUTO]. The last channel number and its frequency are

;played.

. Transferring a Programmed Frequency to

~nother Open Channel

his feature allows you to reassign a stored frequency to I nother bank's open channel.

Note: You cannot transfer a Priority Channel (preceded by a uP" on the display). You must assign the Priority to another channel in the same bank before transferring the frequency. (Priority Channels are described later in "Setting Up Priority Channels".)

1.Press [MANUAL] to stop scanning.

2.Use the Rotary Tuner (or any other previously described method) to select a programmed channel.

3.Press [SND] to activate the Transfer feature. All bank indicators start flashing on the display.

4.Press the numeric key(s) of the selected bank.

Only the indicator of the selected bank remains on the display. The bank's lowest open channel flashes,

waiting to be programmed.

5.Press [E] to complete the transfer.

The frequency is now stored in the new channel, and the old channel is empty.

21

Page 22 Page 24
Image 23
Page 22 Page 24
Contents USC 2500XL T This equipment contains a Nickel-Cadmium PrecautionsTable of Contents About Your New UBC 2500XLT Leather-like Carrying Case UnpackingAustralia Weather Channels Lets your scanner function as aAuto Store Automatically stores all active frequencies TopView Controls and IndicatorsFrontView Scan KEY @ @4 Display. Note Youcannotdeactivateall20 banks LMTLIntKV Frequency. To store the same frequency into Send KEY Hold UO WX 1 2 KHz AM NFM WFM IkeylockiSetup Mounting the Flexible Antenna Installing the Belt ClipBand Search The Search function is different from Scanning OverviewBank Scan If you have programmed channels, you Then, press Manual Programming Channels0 5 ProgrammingWith the Rotary Tuner If the selected channel already has a stored Frequency HLD to stay on that frequency Ress Manual to stop scanningExample Set search limits of 137.000 to 144.000 MHz Press SRC to start the search4 0 0 Press LMT Auto Store feature automatically stores all activePress Manual to stop scanning First enter the lower limit by pressingDisplay. In this case, select another bank ~nother Open ChannelPress E Current channel is erased, and the display shows Deleting a Stored FrequencyPress Manual again Scann ingWeather Channel Scanning Customizing Scanner Operation Press Scan to start scanning This feature is active in Manual Mode or Scan ModeSetting Up Priority Channels To activate the Count feature Using Count to Monitor Channel ActivityReprogram each channel Care and MaintenanceTurn the scanner off before removing the Battery Pack Event of memory loss. If memory is lost, simplyDo not use excessive amounts of water Clean the outside of the scanner with a mild detergentProblem Troubleshooting137 174 222 400 520 Technical SpecificationsSearch Band DisplayWarranty Unid~n~GP
Top Page Image Contents