Uniden USC 2500XL T manual Using Count to Monitor Channel Activity, To activate the Count feature

Page 30

Using COUNT to Monitor Channel Activity

To determine the amount of channel activity during a scanning session, use the Count feature. It counts the number of times scanning stops on an active channel.

To activate the Count feature:

1.Press [SCAN], and allow the scanner to scan for about 5 to 10 minutes, or longer if desired.

2.Press [MANUAL] to stop scanning.

3.Press [CNT].

"COUN1'appears on the display.

4.Turn the Rotary Tuner or press [MANUAL] to display each channel and the number count (up to "99").

To reset the Count number to "00", press [.] twice.

To exit Count Mode, press [CNT].

28

Image 30

Contents USC 2500XL T Precautions This equipment contains a Nickel-CadmiumTable of Contents About Your New UBC 2500XLT Unpacking Leather-like Carrying CaseWeather Channels Lets your scanner function as a Auto Store Automatically stores all active frequenciesAustralia Controls and Indicators TopViewFrontView Scan KEY @ @4 Display. Note Youcannotdeactivateall20 banks LMTLIntKV Frequency. To store the same frequency into Hold UO WX 1 2 KHz AM NFM WFM Ikeylocki Send KEYSetup Installing the Belt Clip Mounting the Flexible AntennaScanning Overview Bank Scan If you have programmed channels, youBand Search The Search function is different from Programming Channels 0 5Then, press Manual ProgrammingWith the Rotary Tuner If the selected channel already has a stored Frequency Press SRC to start the search Ress Manual to stop scanningExample Set search limits of 137.000 to 144.000 MHz HLD to stay on that frequencyFirst enter the lower limit by pressing Auto Store feature automatically stores all activePress Manual to stop scanning 4 0 0 Press LMT~nother Open Channel Display. In this case, select another bankDeleting a Stored Frequency Press E Current channel is erased, and the display showsScann ing Press Manual againWeather Channel Scanning Customizing Scanner Operation This feature is active in Manual Mode or Scan Mode Press Scan to start scanningSetting Up Priority Channels Using Count to Monitor Channel Activity To activate the Count featureEvent of memory loss. If memory is lost, simply Care and MaintenanceTurn the scanner off before removing the Battery Pack Reprogram each channelClean the outside of the scanner with a mild detergent Do not use excessive amounts of waterTroubleshooting ProblemDisplay Technical SpecificationsSearch Band 137 174 222 400 520Warranty Unid~n~GP