Uniden USC 2500XL T manual If the selected channel already has a stored Frequency

Page 20

6.Press [E]. The frequency is now programmed into the current channel.

You are finished, and may now skip to the next section.

7.Press [SND] twice. When the channel number blinks, enter the new channel number using the numeric keys.

8.Press [HLD] to see if the selected channel is already programmed.

If the selected channel already has a stored

frequency:

The display alternates between the current channeV frequency and the selected channel! frequency. If you wish to keep the selected channel's frequency, press[.] twice to return to Step 7. Otherwise, that frequency will be replaced by the new frequency selection when programming is completed.

If the selected channel is open (empty):

The display alternates between the current channellfrequency and the selected channeVopen frequency (000.000).

Note: Be sure you have pressed [HLD] before continuing with the next step. Otherwise IlError" appears on the display when you try to complete the programming entry. This is to avoid accidentally erasing a frequency you want to keep.

9.Press [E] to complete programming.

You are finished, and may now skip to the next section.

10.Press [SND].

"BANK" flashes on the display, and the current bank number is shown.

11.Press the numeric key(s) for the new bank selection.

The new bank indicator appears, and its lowest open channel starts flashing. When programming is completed, the frequency will automatically be stored into the channel. Note: After entering the selected bank number if the screen displays a message indicating the bank is IIFULL",inthis case select another bank.

12.Press [E] to complete programming.

The frequency is stored, and the bank channel is displayed with its new frequency. (The old channel will retain its original frequency.)

18

Page 19 Page 21
Image 20
Page 19 Page 21
Contents USC 2500XL T Precautions This equipment contains a Nickel-CadmiumTable of Contents About Your New UBC 2500XLT Unpacking Leather-like Carrying CaseAustralia Weather Channels Lets your scanner function as aAuto Store Automatically stores all active frequencies Controls and Indicators TopViewFrontView Scan KEY @ @4 Display. Note Youcannotdeactivateall20 banks LMTLIntKV Frequency. To store the same frequency into Hold UO WX 1 2 KHz AM NFM WFM Ikeylocki Send KEYSetup Installing the Belt Clip Mounting the Flexible AntennaBand Search The Search function is different from Scanning OverviewBank Scan If you have programmed channels, you Then, press Manual Programming Channels0 5 ProgrammingWith the Rotary Tuner If the selected channel already has a stored Frequency Ress Manual to stop scanning Example Set search limits of 137.000 to 144.000 MHzPress SRC to start the search HLD to stay on that frequencyAuto Store feature automatically stores all active Press Manual to stop scanningFirst enter the lower limit by pressing 4 0 0 Press LMT~nother Open Channel Display. In this case, select another bankDeleting a Stored Frequency Press E Current channel is erased, and the display showsScann ing Press Manual againWeather Channel Scanning Customizing Scanner Operation This feature is active in Manual Mode or Scan Mode Press Scan to start scanningSetting Up Priority Channels Using Count to Monitor Channel Activity To activate the Count featureCare and Maintenance Turn the scanner off before removing the Battery PackEvent of memory loss. If memory is lost, simply Reprogram each channelClean the outside of the scanner with a mild detergent Do not use excessive amounts of waterTroubleshooting ProblemTechnical Specifications Search BandDisplay 137 174 222 400 520Warranty Unid~n~GP
Top Page Image Contents