Uniden USC 2500XL T manual Mounting the Flexible Antenna, Installing the Belt Clip

Page 16

To fully charge the battery, leave the Adaptor/Charger connected for 14 to 16 hours. Note: You can operate

the unit while the battery is charging.

3.When charging is complete, disconnect the Adaptor/ Charger from the AC outlet and from the Battery Pack.

Note: Disconnect the AC Adaptor/Charger from the unit during a power failure.

Mounting the Flexible Antenna

Place the end of the antenna onto the BNC connector on top of the scanner and turn clockwise until tight.

Installing the Belt Clip

Place the Belt Clip slightly above the mounti:lg area on the back of the scanner, and press downward and in.

~

14

Image 16
Contents USC 2500XL T Precautions This equipment contains a Nickel-CadmiumTable of Contents About Your New UBC 2500XLT Unpacking Leather-like Carrying CaseAuto Store Automatically stores all active frequencies Weather Channels Lets your scanner function as aAustralia Controls and Indicators TopViewFrontView Scan KEY @ @4 Display. Note Youcannotdeactivateall20 banks LMTLIntKV Frequency. To store the same frequency into Hold UO WX 1 2 KHz AM NFM WFM Ikeylocki Send KEYSetup Installing the Belt Clip Mounting the Flexible AntennaBank Scan If you have programmed channels, you Scanning OverviewBand Search The Search function is different from 0 5 Programming ChannelsThen, press Manual ProgrammingWith the Rotary Tuner If the selected channel already has a stored Frequency Ress Manual to stop scanning Example Set search limits of 137.000 to 144.000 MHzPress SRC to start the search HLD to stay on that frequencyAuto Store feature automatically stores all active Press Manual to stop scanningFirst enter the lower limit by pressing 4 0 0 Press LMT~nother Open Channel Display. In this case, select another bankDeleting a Stored Frequency Press E Current channel is erased, and the display showsScann ing Press Manual againWeather Channel Scanning Customizing Scanner Operation This feature is active in Manual Mode or Scan Mode Press Scan to start scanningSetting Up Priority Channels Using Count to Monitor Channel Activity To activate the Count featureCare and Maintenance Turn the scanner off before removing the Battery PackEvent of memory loss. If memory is lost, simply Reprogram each channelClean the outside of the scanner with a mild detergent Do not use excessive amounts of waterTroubleshooting ProblemTechnical Specifications Search BandDisplay 137 174 222 400 520Warranty Unid~n~GP