Uniden USC 2500XL T manual Weather Channel Scanning

Page 26

Weather Channel Scanning

The USC 2500XL T allows you to search for your local weather channel.

Press [WX] to find the active weather channel in your area from 7 preprogrammed channels. "wx" appears on the display.

To exit Weather Mode, press [SRC], [SCAN], or [MANUAL].

It is possible that your area is covered by more than one weather station.

When you press [WX], the USC 2500XL T will find an active broadcast immediately. If the broadcast sounds weak and distant, press [WX] again to look for a closer station.

Note: Currently the Weather Service is not available in Australia.

24

Image 26

Contents USC 2500XL T Precautions This equipment contains a Nickel-CadmiumTable of Contents About Your New UBC 2500XLT Unpacking Leather-like Carrying CaseAustralia Weather Channels Lets your scanner function as aAuto Store Automatically stores all active frequencies Controls and Indicators TopViewFrontView Scan KEY @ @4 Display. Note Youcannotdeactivateall20 banks LMTLIntKV Frequency. To store the same frequency into Hold UO WX 1 2 KHz AM NFM WFM Ikeylocki Send KEYSetup Installing the Belt Clip Mounting the Flexible AntennaBand Search The Search function is different from Scanning OverviewBank Scan If you have programmed channels, you Then, press Manual Programming Channels0 5 ProgrammingWith the Rotary Tuner If the selected channel already has a stored Frequency Press SRC to start the search Ress Manual to stop scanningExample Set search limits of 137.000 to 144.000 MHz HLD to stay on that frequencyFirst enter the lower limit by pressing Auto Store feature automatically stores all activePress Manual to stop scanning 4 0 0 Press LMT~nother Open Channel Display. In this case, select another bankDeleting a Stored Frequency Press E Current channel is erased, and the display showsScann ing Press Manual againWeather Channel Scanning Customizing Scanner Operation This feature is active in Manual Mode or Scan Mode Press Scan to start scanningSetting Up Priority Channels Using Count to Monitor Channel Activity To activate the Count featureEvent of memory loss. If memory is lost, simply Care and MaintenanceTurn the scanner off before removing the Battery Pack Reprogram each channelClean the outside of the scanner with a mild detergent Do not use excessive amounts of waterTroubleshooting ProblemDisplay Technical SpecificationsSearch Band 137 174 222 400 520Warranty Unid~n~GP