Weed Eater 2600 manual Command Reference, Debug dspapi, Debug hpi

Page 31

Cisco High-Density Analog Voice and Fax Network Module

Command Reference

Command Reference

This section documents previously undocumented commands. All other commands used with this feature are documented in the Cisco IOS Release 12.2 command reference publications.

•debug dspapi, page 32

•debug hpi, page 34

This section documents modified commands. All other commands used with this feature are documented in the Cisco IOS Release 12.2 command reference publications.

•voice-port, page 35

Cisco IOS Release 12.2(2)XT and 12.2(8)T

31

Page 30 Page 32
Image 31
Page 30 Page 32
Contents Cisco High-Density Analog Voice and Fax Network Module Feature History Release ModificationInterface Feature OverviewBase Module Voice Port NumbersFXS and FXO Interfaces Telephony Signaling InterfacesDisconnect Supervision Commands Delay in Voice Networks FXO Supervisory Disconnect Tone CommandsEcho Cancellation Voice Level AdjustmentAdaptive Jitter Buffering Cost Effective Voice Activity Detection CommandsServiceability BenefitsSupported low-Complexity Codecs RestrictionsSupported High-Complexity Codecs Supported Medium-Complexity CodecsRelated Documents Supported PlatformsCisco 2600 series Prerequisites Supported Standards, MIBs, and RFCsFXO or FXS Configuration TasksConfiguring Analog FXO and FXS Voice Ports Command PurposeLocale that has been configured Keyword default is 25 on Cisco 2600 seriesDefault is Default is the pattern specified by the cptoneFine-Tuning Analog Voice Ports Configuring Voice Activity Detection VADConfiguring Disconnect Supervision Commands Command to configure a loop-start voice port to not Enables battery reversal. The default is that batteryReversal is enabled For FXO ports-Use the no battery-reversalConfiguring FXO Supervisory Disconnect Tone Commands Voice network module is installed From 0 to 1000 0 ms to 10 sec. The default isSec. The default is Exits voice class configuration modeConfiguring Timeouts Commands Timing Commands Configuring Adaptive Jitter Adjustment Voice Quality Tuning CommandsConfiguring Voice Level Adjustment Configuring Echo AdjustmentPlatform Command Syntax Verifying Analog Voice-Port ConfigurationsTroubleshooting Chart, Voice Port Testing Commands, Troubleshooting TipsKeyword setting also called region tone is US Troubleshooting ChartProblem Suggested Action Reconfigure the voice portConfiguring Voice Level Adjustment section on Voice Port Testing CommandsLoopback Function Tests Detector-Related Function TestsRelay-Related Function Tests Tone Injection TestsVoice port to voice mode Fax/Voice Mode TestsKeyword fax to force the voice port into fax mode Test. Enter the keyword disable to returnAnalog FXO Voice Port Example Configuration ExamplesAnalog FXS Voice Port Example Debug dspapi, Debug hpi, Command ReferenceRelease Modification Defaults Command Modes Command HistoryDebug dspapi Syntax DescriptionRelated Commands Description Usage Guidelines Examples DefaultsCommand Modes Command History Debug hpiCisco 2600, and Cisco 3600 Router Global configurationTo global configuration mode Voice-portEncapsulation Dial-peer voiceGlossary
Related manuals
Manual 9 pages 15.51 Kb
Top Page Image Contents