Weed Eater manual Voice-port, Cisco 2600, and Cisco 3600 Router, Global configuration

Cisco High-Density Analog Voice and Fax Network Module

voice-port

voice-port

To enter voice-port configuration mode, use the voice-portcommand in global configuration mode.

Cisco 2600, and Cisco 3600 Router

voice-port{slot-number/subunit-number/port}

Syntax Description	slot-number	Slot number in the Cisco router in which the High-Density Analog Voice
		and Fax Network Module (NM-HDA) is installed. Valid entries are from 0
		to 3, depending on the slot in which it has been installed.
	subunit-number	Subunit on the NM-HDA in which the voice port is located. Valid entry is 0.
	port	Voice port number. Valid entries are 0 to 21.
	slot	The router location in which the voice port adapter is installed. Valid entries
		are from 0 to 3.
	port	• Indicates the voice interface card location. Valid entries are 0 to 21. See
		Table 1 on page 2 for port numbering.
Defaults	No default behavior or values

Command Modes

Command History

Global configuration

Release	Modification
11.3(1)T	This command was introduced.
11.3(3)T	Support for Cisco 2600 series routers was added.
12.0(3)T	Support for the Cisco AS5300 access server was added.
12.0(7)T	Support for the Cisco AS5800 universal access server, the Cisco 7200 series
	router, and the Cisco 1750 router was added. Arguments for the
	Cisco 2600 series and Cisco 3600 series router were added.
12.2(2)XT	This command was modified on the Cisco 2600 series, the Cisco 3640 series
	and the Cisco 3660 series to accommodate the additional ports of the
	NM-HDA.
12.2(8)T	This command was integrated into the Cisco IOS Release 12.2(8)T.

Usage Guidelines	Use the voice-port command in global configuration mode to switch to voice-port configuration mode
	from global configuration mode. Use the exit command to exit voice-port configuration mode and return
	to global configuration mode.
Examples	The following example accesses voice-port configuration mode for port 0, located on subunit 0 on a
	voice interface card installed in slot 1 for the Cisco 3660 series:
	voice-port 1/0/0
	Cisco IOS Release 12.2(2)XT and 12.2(8)T

35