Weed Eater manual Supported Platforms, Related Documents, Cisco 2600 series

Page 9

Cisco High-Density Analog Voice and Fax Network Module

Supported Platforms

Related Documents

For information about installing voice network modules and voice interface cards in Cisco 2600 series, Cisco 3640 and Cisco 3660 routers, see these publications:

•Cisco 2600 Series Hardware Installation Guide

•Cisco 3620 and Cisco 3640 Modular Access Routers Quick Start Guide

•Cisco 3600 Series Hardware Installation Guide

•Update to the Cisco Network Module Hardware Installation Guide

•WAN Interface Card Hardware Installation Guide

For information about configuring Voice features, see these publications:

•Cisco 2600 Series Software Configuration Guide

•Cisco IOS Release 12.2 Voice, Video, and Fax Configuration Guide

•Cisco IOS Release 12.2 Voice, Video, and Fax Command Reference Guide

Supported Platforms

•Cisco 2600 series

•Cisco 3640

•Cisco 3660

Determining Platform Support Through Cisco Feature Navigator

Cisco IOS software is packaged in feature sets that support specific platforms. To get updated information regarding platform support for this feature, access Cisco Feature Navigator. Cisco Feature Navigator dynamically updates the list of supported platforms as new platform support is added for the feature.

Cisco Feature Navigator is a web-based tool that enables you to quickly determine which Cisco IOS software images support a specific set of features and which features are supported in a specific Cisco IOS image. You can search by feature or release. Under the release section, you can compare releases side by side to display both the features unique to each software release and the features in common.

To access Cisco Feature Navigator, you must have an account on Cisco.com. If you have forgotten or lost your account information, send a blank e-mail to cco-locksmith@cisco.com. An automatic check will verify that your e-mail address is registered with Cisco.com. If the check is successful, account details with a new random password will be e-mailed to you. Qualified users can establish an account on Cisco.com by following the directions at http://www.cisco.com/register.

Cisco Feature Navigator is updated regularly when major Cisco IOS software releases and technology releases occur. For the most current information, go to the Cisco Feature Navigator home page at the following URL:

http://www.cisco.com/go/fn

Cisco IOS Release 12.2(2)XT and 12.2(8)T

9

Image 9

Contents Cisco High-Density Analog Voice and Fax Network Module Feature History Release ModificationBase Module Feature OverviewVoice Port Numbers InterfaceFXS and FXO Interfaces Telephony Signaling InterfacesDisconnect Supervision Commands Delay in Voice Networks FXO Supervisory Disconnect Tone CommandsVoice Level Adjustment Echo CancellationAdaptive Jitter Buffering Serviceability Voice Activity Detection CommandsBenefits Cost EffectiveSupported High-Complexity Codecs RestrictionsSupported Medium-Complexity Codecs Supported low-Complexity CodecsSupported Platforms Related DocumentsCisco 2600 series Prerequisites Supported Standards, MIBs, and RFCsConfiguring Analog FXO and FXS Voice Ports Configuration TasksCommand Purpose FXO or FXSDefault is Keyword default is 25 on Cisco 2600 seriesDefault is the pattern specified by the cptone Locale that has been configuredFine-Tuning Analog Voice Ports Configuring Voice Activity Detection VADConfiguring Disconnect Supervision Commands Reversal is enabled Enables battery reversal. The default is that batteryFor FXO ports-Use the no battery-reversal Command to configure a loop-start voice port to notConfiguring FXO Supervisory Disconnect Tone Commands Sec. The default is From 0 to 1000 0 ms to 10 sec. The default isExits voice class configuration mode Voice network module is installedConfiguring Timeouts Commands Timing Commands Configuring Adaptive Jitter Adjustment Voice Quality Tuning CommandsConfiguring Voice Level Adjustment Configuring Echo AdjustmentPlatform Command Syntax Verifying Analog Voice-Port ConfigurationsTroubleshooting Chart, Voice Port Testing Commands, Troubleshooting TipsProblem Suggested Action Troubleshooting ChartReconfigure the voice port Keyword setting also called region tone is USConfiguring Voice Level Adjustment section on Voice Port Testing CommandsLoopback Function Tests Detector-Related Function TestsRelay-Related Function Tests Tone Injection TestsKeyword fax to force the voice port into fax mode Fax/Voice Mode TestsTest. Enter the keyword disable to return Voice port to voice modeAnalog FXO Voice Port Example Configuration ExamplesAnalog FXS Voice Port Example Debug dspapi, Debug hpi, Command ReferenceDebug dspapi Defaults Command Modes Command HistorySyntax Description Release ModificationRelated Commands Description Command Modes Command History DefaultsDebug hpi Usage Guidelines ExamplesTo global configuration mode Global configurationVoice-port Cisco 2600, and Cisco 3600 RouterEncapsulation Dial-peer voiceGlossary

Related manuals

Manual 9 pages 15.51 Kb