Leica TPS400 user manual Start and execution Peg Survey, Step

Page 8

Start and execution Peg Survey

•Press [MENU] and [F1] for programs.

•Press [F1] for Peg Survey.

>Step 1 Select a job.

>Step 2 Confirm the set of tolerances.

> Step 3

Choose "Start" by pressing [F4], then enter point number (PtID) and instrument height (hi) for the station.

The sign for the instrument height (hi) is normally negative.

> Step 4 [SET]

Set Point number (PtID) and instrument height (hi).

[EXIT] Leaves "Input Station" and returns to the start-up menu.

TPS400 Mining Manual-1.0.0en

8

Peg Survey

Image 8

Contents TPS400 Series Quick way to start with the TPS400 Mining Programs Contents Overview Contents Introduction How to use this manualSymbols used in the sequence of operation Known Unknown Peg SurveyIntroduction Data uploading using Mining Editor Before starting Peg SurveyStart and execution Peg Survey StepValid coords Error messagesStation or BS point has no Number of sets Proceeding Peg Survey SequenceMeasure Backsight Point Set 1 of totalMeasure or DIST/REC ExitRepeat and until all sets are measured DHD ResultsDHz MHz MHDBS/FS AverageResults Saving data ResultResidual Coordinates foresight pointFront Line Peg Grades KnownStart and execution Grades Slope gradient explained Gradeline Marking Height difference dHgt and horizontal distance dHD explained Grades Result Measurement dataPoint Offset Start and execution Offset Start and execution Offset Saving data Offset informationPolar setout Setting outSetting out coordinates from memory Procedure Orthogonal setout Cartesian setout Tie Distance Radial Method Determine second targetResult is displayed Polygonal MethodSoftkeys polygonal method Softkeys radial methodInstallation on the PC Program contentMining Editor Mining EditorPractical Examples Define and upload TolerancesExample1 Example2Creating fixpoint files Define tolerances File ! Save AsFile ! Open Second Example Importing of fixpoints in Ascii format Process import fixpoint filesISO standard