Panasonic PT-LM2E manual Dear Panasonic Customer, Important Safety Notice

Page 2

Dear Panasonic Customer:

This instruction booklet provides all the necessary operating information that you might require. We hope it will help you to get the most out of your new product, and that you will be pleased with your Panasonic LCD projector.

The serial number of your product may be found on its bottom. You should note it in the space provided below and retain this booklet in case service is required.

Model number: PT-LM2E

Serial number:

IMPORTANT SAFETY NOTICE

WARNING: THIS APPARATUS MUST BE EARTHED.

WARNING: To prevent damage which may result in fire or shock hazard, do not expose this appliance to rain or moisture.

Machine Noise Information Ordinance 3. GSGV, January 18, 1991: The sound pressure level at the operator position is equal or less than 70 dB

(A) according to ISO 7779.

WARNING:

1)Remove the plug from the wall outlet when this unit is not in use for a prolonged period of time.

2)To prevent electric shock, do not remove cover. No user serviceable parts inside. Refer servicing to qualified service personnel.

3)Do not remove the earthing pin on the power plug. This apparatus is equipped with a three prong earthing-type power plug. This plug will only fit an earthing-type power outlet. This is a safety feature. If you are unable to insert the plug into the outlet, contact an electrician. Do not defeat the purpose of the earthing plug.

WARNING:

BFor permanently connected equipment, a readily accessible disconnect device shall be incorporated in the building installation wiring;

BFor pluggable equipment, the socket-outlet shall be installed near the equipment and shall be easily accessible.

CAUTION:

To assure continued compliance, follow the attached installation instructions, which include using the shielded interface cables when connecting to a computer or peripheral device.

2-ENGLISH

Image 2 Contents
LCD Projector Commercial Use Model No. PT-LM2EImportant Safety Notice Dear Panasonic CustomerFor Your SAFETY, Please Read the Following Text Carefully Important the Moulded Plug U.K. onlyContents Do not remove the cover or modify it in any way Precautions with regard to safetyDo not overload the mains socket Do not place the projector into water or let it become wet Do not handle the mains plug with wet handsInsert the mains plug securely into the mains socket Do not place liquid containers on top of the projectorDo not cover the air inlet or the air outlet Do not use the projector in a bath or showerDo not look into the lens while the projector is being used Always disconnect all cables before moving the projectorUse only the specified batteries Insulate the battery using tape or similar before disposalDo not put your weight on this projector Accessories Before use Screen Order to get the best picture qualityDo not touch the surfaces of the lens with your bare hands LampLeg adjuster buttons L/R Location and function of each part# Connector panel $ Air outlet port Remote control unit Projector control panel Top MenuRGB Input indicator $ Temp indicatorLamp indicator Auto Setup button pages 23Video in jack Video in connector pages 20Audio in L-R jacks pages 19 Power input socket AC Security lockSetting-up Projection methodsProjector position Projection distancesConnecting to computer ConnectionsConnecting to video equipment Preparation for the remote control unit Insert the battery holderTurn on the power of all connected devices Turning on the power$Press the Power button Before turning on the power 1, Ensure that all peripheralAdjusting the size Press the input select button to select the input signalAdjusting the angle Adjusting the focusTurning off the power Press the Power buttonPower indicator Projector statusPress the Auto Setup button Press the Freeze button Pausing a picture FreezeTurning off the picture and sound momentarily Shutter Press the Volume +/- button Adjusting the volume VolumeRemote control unit functions during D.ZOOM digital zoom Enlarging the picture D.ZOOMDisplaying two screens Index Window Press the Index Window buttonKeystone On-screen menusMenu screens KeystoneKEY Auto POW.OFF Disable SignalPower High OPTION1Select ADJ Menu operation guidePicture Standard Returning a setting to the factory defaultPicture Mode PictureVertical Correcting keystone distortionVertical keystone distortion correction only OperationContrast Adjusting the picturePicture Mode DynamicTint BrightColor SharpnessStill Mode Still ModeSignal Mode Projecting sRGB-compatible picturesPosition Adjusting the positionClock Phase DOT ClockAspect Aspect AutoResizing Frame LockChanging the display language EnglishOSD Option settingsAuto Signal Auto KeystnBack Color Sxga ModeLamp Power FRONT/REARFunc Power MemoryLamp Runtime Control KEYAmend Passwd Setting up the security functionInput Passwd SecurityText Display Text ChangeTemp indicator Lamp indicator RemedyLamp Power Cleaning and replacing the air filter CleaningLamp unit replacement period Replacing the lamp unitLamp unit replacement procedure Lamp unit fixing screwsRuntime Time ResetOPTION2 DESK/CEILING Desk FAN Control Standard LampBefore calling for service Correctly Problem Possible causeNot display Picture fromCleaning and maintenance Wipe the cabinet with a soft, dry clothSpecifications PAL60/SECAMRemote control unit OptionsList of compatible signals AppendixPin No Connector pin wiringProjection dimensions calculation methods Dimensions Trademark acknowledgements
Related manuals
Manual 60 pages 7.64 Kb