Panasonic PT-LM2E manual Still Mode, Signal Mode, Projecting sRGB-compatible pictures

STILL MODE

STILL MODE	OFF
	[
	ON

To reduce flickering of still images (vertical flicker), set “STILL MODE” to “ON”.

NOTE:

BDo not set “STILL MODE” to “ON” when playing back moving images.

SIGNAL MODE

(RGB/YPBPR only)

This displays the type of signal which is currently being projected.

Refer to the table on page 58 for details on each type of signal.

Projecting sRGB-compatible pictures

sRGB is an international colour reproduction standard (IEC61966-2-1) established by the International Electrotechnical Commission (IEC). If you would like the colours in sRGB- compatible pictures to be reproduced more faithfully, make the following settings.

#Press the F or G button to select “PICTURE MODE”, and then press the I or H button to select “NATURAL”.

$Press the STD (standard) button on the remote control unit.

%Press the F or G button to select “COLOR TEMP.”, and then press the I or H button to select “STANDARD”.

NOTE:

BsRGB is only enabled when RGB signals are being input (when “LAMP POWER” is set to “HIGH”).

Adjustments and settings

ENGLISH-37