Panasonic PT-LM2E manual Text Display, Text Change

NOTE:

BThe entered password will appear as . It will not be displayed on the screen.

BIf you enter the wrong password, the letters “PASSWORD” and “NEW” will become red. Enter the correct password again.

TEXT DISPLAY

The setup letters can be displayed at the bottom of the projected image while an image is projected.

ON

“TEXT DISPLAY” is enabled.

OFF

“TEXT DISPLAY” is disabled.

TEXT CHANGE

The setup letters which will be displayed when “TEXT DISPLAY” is set to “ON” can be changed.

Press the ENTER button to display the “TEXT CHANGE” screen.

TEXT CHANGE

ABCDEFGHIJKLMNO PQRSTUVWXYZ0123 456789 @ .:;/+-

#Press the F, G, I and H buttons to select the characters, then press the ENTER button. (You can enter 22 characters continuously.)

CSelect “BS” to delete a character.

$Press the F, G, I and H buttons to select “OK”, then press the ENTER button.

CSelect “Cancel” to cancel the change.