![](/images/new-backgrounds/1264792/2647929x1.webp)
Precautions with regard to safety
WARNING
If you notice smoke, strange smells or noise coming from the projector, disconnect the mains plug from the mains socket.
BDo not continue to use the projector in such cases, otherwise fire or electric shocks could result.
BCheck that no more smoke is coming out, and then contact an Authorised Service Centre for repairs.
BDo not attempt to repair the projector yourself, as this can be dangerous.
Do not install this projector in a place which is not strong enough to take the full weight of the projector.
BIf the installation location is not strong enough, it may fall down or tip over, and severe injury or damage could result.
Installation work (such as ceiling suspension) should only be carried out by a qualified technician.
BIf installation is not carried out correctly, there is the danger that injury or electric shocks may occur.
If foreign objects or water get inside the projector, or if the projector is dropped or the cabinet is broken, turn off the power and disconnect the mains lead from the mains socket.
BContinued use of the projector in this condition may result in fire or electric shocks.
BContact an Authorised Service Centre for repairs.
Do not overload the mains socket.
BIf the power supply is overloaded (for example, by using too many adapters), overheating may occur and fire may result.
Do not remove the cover or modify it in any way.
BHigh voltages can cause fire or electric shocks.
BFor any inspection, adjustment and repair work, please contact an Authorised Service Centre.
Clean the mains plug regularly to prevent it from becoming covered in dust.
BIf dust builds up on the mains plug, the resulting humidity can damage the insulation, which could result in fire. Pull the mains lead out from the mains socket and wipe it with a dry cloth.
BIf not using the projector for an extended period of time, pull the mains plug out from the mains socket.
Preparation