![](/images/new-backgrounds/1264792/26479245x1.webp)
&Press the input select button to select the input signal.
Input select | VIDEO | RGB | |
buttons | |||
|
|
Changing | RGB VIDEO | VIDEO |
| RGB | |
signals | ||
|
BA picture will be projected in accordance with the selected input signal.
BWhen a YPBPR signal is being input, “YPBPR” will be displayed instead of “RGB”.
Follow the procedure below when you set the projector up first, and when you change the setup place.
'Adjusting the angle
BWhile pressing the adjuster buttons, adjust the forward/back angle of tilt of the projector. Adjust so that the projector is as vertical to the screen as possible.
(Press the AUTO SETUP button to initiate automatic positioning.
BThe tilt of the projector and the input |
| |
signal will be detected and keystone |
| |
distortion and the position of the | AUTO SETUP | |
image will be corrected. | ||
| ||
(Refer to page 26 for details.) |
|
)Adjusting the size
BTurn the zoom ring to adjust the size of the projected image.
*Adjusting the focus
BTurn the focus ring to adjust the focus of the projected image.
Basic Operation