Panasonic PT-FW300NTU, PT-FW300U manual Remote control, About Your Projector, Battery compartment

Page 14

About Your Projector

Remote control

Attaching a hand strap

Top view

Remote control indicator

You can attach a favorite

Remote control signal

Pressing any button except the LASER

strap on to the remote

emitters (page 25)

button, the remote control indicator will

control.

 

flash. Pressing the LASER button, it will

 

Laser pointer beam

lit.

 

emitter (page 29)

 

Preparation

Power button

While the MAIN POWER is on, switch between standby mode and projection mode. (page 21)

Project a laser pointer. (page 29)

Display the main menu. (page 32)

Navigate through the menus with FGIH, and activate the menu item with the ENTER button. (page 32)

Capture the projected image as a frozen picture.

(page 27)

Reset some of the settings to the factory default settings. (page 27)

Assign the frequently use functions from the options for shortcut. (page 27)

Control to change the scale by means of digital zoom. (page 26)

(Shown as PT-FW300NTU)

Automatically adjust the setting of SHIFT, DOT

CLOCK, CLOCK PHASE and SIGNAL SEARCH for

the projected image of COMPUTER/ DVI signal. (page 25)

Switch the required input signal button to select.

Return to the previous menu. (page 32)

Turn off the projection temporarily. (page 27)

Display the frozen image while the display of subsequent images

continues. (page 27)

Display 2 different source images at a time.

(page 27)

Control to adjust the volume of the speaker. (page 29)

These buttons are for network control. See the contents of the provided CD-ROM for instructions. The COMPUTER SEARCH button is for PT-FW300NTU only.

Battery compartment

1.Press the tab and lift up the cover.

2.Insert the batteries according to the polarity diagram indicated inside.

NOTE:

•Do not drop the remote control.

•Avoid contact with liquids or moisture.

•Use manganese batteries or alkaline batteries with the remote control.

•Do not attempt to modify or disassemble the remote control. Contact an Authorized Service Center for repairs.

•Do not keep pressing the remote control buttons as this may shorten battery life.

•Do not point the laser in other people’s eyes or stare into beam.

•See “Remote control operation” on page 25.

ENGLISH - 14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents PT-FW300U Important Safety Notice Dear Panasonic CustomerTrade Name Important Safety NoticeDeclaration of Conformity PanasonicContents Contents SettingsMaintenance AppendixPrecautions with regard to safety Do not look into the lens while the projector is being used Precautions with regard to safetyDo not set up the projector outdoors Use only the specified batteries Remove the used batteries from the remote control promptlyDo not put your weight on this projector Do not mix old and new batteriesLiquid crystal panel SecurityOrder to get the best picture quality Optical componentsPower cord secure lock AccessoriesPower cord Minimum required setting screen Read this firstTop and front view About Your ProjectorProjector body Control panelSecurity lock Auto cleaning filter ACF Front leg Adjusters CompartmentAbout Your Projector Back and bottom view Lamp unit compartment Air exhaust portCLOCK, Clock Phase and Signal Search for Remote controlAttaching a hand strap Top view Remote control indicator Battery compartmentCalculation methods Setting upScreen size and throw distance Projection size 16 Throw distance LProjection method Front leg adjusters and throwing angleSetting up Mounting on the ceiling and projecting from frontHorizontal shift Adjusting the lens shift leverLens shift and positioning Vertical shiftWhen the projector position is fixed Setting up Projector location rangeWhen the screen position is fixed Before connection to the projector Connecting example ComputersConnections LAN terminalConnecting with DVI-D Connecting example AV equipmentConnecting with Video IN/S-VIDEO ConnectionsConnecting Switching the projector on/offPower cord Direct power on functionPower indicator informs you the status of the power Power indicatorSwitching the projector on/off Switch the Main Power on Press the power button Switching on the projectorSwitching off the projector Switch off the Main Power on the back of the projectorPositioning the image Selecting the input signalProjecting an image Operating range Remote control operationSetting up the image position automatically Facing to the projectorSwitching the input signal Enlarging the centered areaCapturing an image Resetting to the factory default settingsProjecting an image in INDEX-WINDOW mode Stopping the projectionSide by Side function signal combination table Using an assigned functionSwitching the signal Projecting 2 different source image at a timeDisable the Laser button Using the laser pointerControlling the volume of the speaker Laser pointer beam emitterInput Guide Menu NavigationMain menu and Sub-menu OSD DesignClosed Caption Setting Menu NavigationNavigating through the menu Adjusting with the bar scale itemsOperating procedure Displaying the Main menuPicture menu Digital Cinema Reality Color TemperatureDaylight View TV-SYSTEMPosition menu Aspect ratio options AspectPosition menu 169Frame Lock Display Option menu Closed Caption SettingScreen Setting DVI-DWide Mode Auto SetupSignal Search Sxga ModeOther Functions Display Option menuStatus Projector Setup menuNo Signal SHUT-OFF COMPUTER2 SelectAudio Setting InstallationHigh Altitude Mode Function ButtonInitialize ALL Filter Counter ResetTest Pattern Remaining Filter of Status in ProjectorSecurity menu PasswordPassword Change Text DisplayMenu Lock Menu Lock PasswordControl Device Setup Security menuItems in Network menu Wireless LAN PT-FW300NTUonlyNetwork menu Network menu, the following items are availableLamp indicator TEMP, Lamp and Filter IndicatorsManaging the indicated problems Temp indicatorReplacing the Lamp unit Care and ReplacementCleaning the projector When to replace the ACF Replacing the Auto Cleaning Filter ACFCare and Replacement Replacement procedure Before replacing the ACFTurn the projector upside down and place it gently Resetting the RemainingCounter Reset in Projector Setup On a soft clothTroubleshooting Quality*2 List of compatible signalsTechnical Information KHz MHzSerial terminal Computer connection guidance Technical Information Cable specificationsControl commands ProjectorInput signal Lamp switchingSwitching input Signals Remote terminalDVI-D in terminal Ceiling mount bracket safeguardsInstalling the safety cable SW m = SD x SH m = SD x Screen size and throw distance for 169 aspect ratioScreen size and throw distance for 43 aspect ratio LW m = 0.0339 x SD LT m = 0.0653 x SDSpecifications DVI-D VideoOUT AudioUnit mm DimensionsTrademark acknowledgements Index FunctionPicture Mode IndexNuméro de série Avis important concernant la sécuritéPT-FW300NTU/PT-FW300U Advertencia Avis important concernant la sécuritéAvertissement Déclaration de conformitéPrécautions de sécurité AvertissementMises EN Garde Précautions de sécuritéPrécautions lors de lutilisation Précautions lors de linstallationPrécautions lors du transport Composants optiques SécuritéAffichage à cristaux liquides Avant de remplacer le lUnité de la lampe Remplacement de lunité de la lampeDélai de remplacement de lUnité de la lampe Retirer et remplacer la lampe Installation du câble de sécuritéProtections du support de montage au plafond
Top Page Image Contents