Panasonic PT-FW300NTU, PT-FW300U manual Switching the input signal, Enlarging the centered area

Page 26

Remote control operation

Switching the input signal

You can switch the input method manually by pressing the COMPUTER, NETWORK and VIDEO buttons. Press the required button several times or I H to cycle through the input methods as follows. The actual projected image will be changed in a while.

The graphical guidance will be displayed on the upper right of the projected image and you can confirm the selected input method which is highlighted in yellow. See “INPUT GUIDE” on page 38.

NOTE:

•If you select an unplugged input method, the guidance will blink on and off several times.

•See “List of compatible signals” on page 52.

•See “Connections” on page 19.

Pressing the COMPUTER button

COMPUTER1		H	COMPUTER2
F			G

		DVI

NOTE:

•Only when the COMPUTER2 SELECT is set to INPUT, the COMPUTER2 is selectable.

Pressing the NETWORK button

Only for the network connection operation. See CD- ROM contents for more detailed information.

Pressing the VIDEO button

VIDEO

IH

S-VIDEO

Pressing the INPUT SELECT button on the projector

Basic Operation

COMPUTER1	H	COMPUTER2
F		G

DVI		S-VIDEO

F		G

NETWORK	I	VIDEO

Enlarging the centered area

You can enlarge the projected image down to a centered area for emphasizing within the range of 1x to 2x.

Enlarging the image	Shifting the center point
1. Press the DIGITAL ZOOM +/- button once.	Press F G I H to shift the center point.

The centered area of the image will then be enlarged to 1.5x.

2.Adjust the image size by pressing the DIGITAL ZOOM +/- button.

The image size will be changed in steps of 0.1.

NOTE:

•When the COMPUTER signal is projected, the enlargement range will be changed to 1x to 3x. When the FRAME LOCK in POSITION menu is set to ON, the enlargement range is 1x to 2x. See “FRAME LOCK” on page 37.

•When the input signal is changed while the DIGITAL ZOOM is activated, the DIGITAL ZOOM will be cancelled.

•While DIGITAL ZOOM is activated, FREEZE is not available.

ENGLISH - 26

Image 26

Contents PT-FW300U Important Safety Notice Dear Panasonic CustomerTrade Name Important Safety NoticeDeclaration of Conformity PanasonicContents Contents SettingsMaintenance AppendixPrecautions with regard to safety Do not look into the lens while the projector is being used Precautions with regard to safetyDo not set up the projector outdoors Use only the specified batteries Remove the used batteries from the remote control promptlyDo not put your weight on this projector Do not mix old and new batteriesLiquid crystal panel SecurityOrder to get the best picture quality Optical componentsPower cord secure lock AccessoriesPower cord Minimum required setting screen Read this firstTop and front view About Your ProjectorProjector body Control panelSecurity lock Auto cleaning filter ACF Front leg Adjusters CompartmentAbout Your Projector Back and bottom view Lamp unit compartment Air exhaust portCLOCK, Clock Phase and Signal Search for Remote controlAttaching a hand strap Top view Remote control indicator Battery compartmentCalculation methods Setting upScreen size and throw distance Projection size 16 Throw distance LProjection method Front leg adjusters and throwing angleSetting up Mounting on the ceiling and projecting from frontHorizontal shift Adjusting the lens shift leverLens shift and positioning Vertical shiftWhen the projector position is fixed Setting up Projector location rangeWhen the screen position is fixed Before connection to the projector Connecting example ComputersConnections LAN terminalConnecting with DVI-D Connecting example AV equipmentConnecting with Video IN/S-VIDEO ConnectionsConnecting Switching the projector on/offPower cord Direct power on functionPower indicator informs you the status of the power Power indicatorSwitching the projector on/off Switch the Main Power on Press the power button Switching on the projectorSwitching off the projector Switch off the Main Power on the back of the projectorPositioning the image Selecting the input signalProjecting an image Operating range Remote control operationSetting up the image position automatically Facing to the projectorSwitching the input signal Enlarging the centered areaCapturing an image Resetting to the factory default settingsProjecting an image in INDEX-WINDOW mode Stopping the projectionSide by Side function signal combination table Using an assigned functionSwitching the signal Projecting 2 different source image at a timeDisable the Laser button Using the laser pointerControlling the volume of the speaker Laser pointer beam emitterInput Guide Menu NavigationMain menu and Sub-menu OSD DesignClosed Caption Setting Menu NavigationNavigating through the menu Adjusting with the bar scale itemsOperating procedure Displaying the Main menuPicture menu Digital Cinema Reality Color TemperatureDaylight View TV-SYSTEMPosition menu Aspect ratio options AspectPosition menu 169Frame Lock Display Option menu Closed Caption SettingScreen Setting DVI-DWide Mode Auto SetupSignal Search Sxga ModeOther Functions Display Option menuStatus Projector Setup menuNo Signal SHUT-OFF COMPUTER2 SelectAudio Setting InstallationHigh Altitude Mode Function ButtonInitialize ALL Filter Counter ResetTest Pattern Remaining Filter of Status in ProjectorSecurity menu PasswordPassword Change Text DisplayMenu Lock Menu Lock PasswordControl Device Setup Security menuItems in Network menu Wireless LAN PT-FW300NTUonlyNetwork menu Network menu, the following items are availableLamp indicator TEMP, Lamp and Filter IndicatorsManaging the indicated problems Temp indicatorReplacing the Lamp unit Care and ReplacementCleaning the projector When to replace the ACF Replacing the Auto Cleaning Filter ACFCare and Replacement Replacement procedure Before replacing the ACFTurn the projector upside down and place it gently Resetting the RemainingCounter Reset in Projector Setup On a soft clothTroubleshooting Quality*2 List of compatible signalsTechnical Information KHz MHzSerial terminal Computer connection guidance Technical Information Cable specificationsControl commands ProjectorInput signal Lamp switchingSwitching input Signals Remote terminalDVI-D in terminal Ceiling mount bracket safeguardsInstalling the safety cable SW m = SD x SH m = SD x Screen size and throw distance for 169 aspect ratioScreen size and throw distance for 43 aspect ratio LW m = 0.0339 x SD LT m = 0.0653 x SDSpecifications DVI-D VideoOUT AudioUnit mm DimensionsTrademark acknowledgements Index FunctionPicture Mode IndexNuméro de série Avis important concernant la sécuritéPT-FW300NTU/PT-FW300U Advertencia Avis important concernant la sécuritéAvertissement Déclaration de conformitéPrécautions de sécurité AvertissementMises EN Garde Précautions de sécuritéPrécautions lors de lutilisation Précautions lors de linstallationPrécautions lors du transport Composants optiques SécuritéAffichage à cristaux liquides Avant de remplacer le lUnité de la lampe Remplacement de lunité de la lampeDélai de remplacement de lUnité de la lampe Retirer et remplacer la lampe Installation du câble de sécuritéProtections du support de montage au plafond