Panasonic PT-FW300U, PT-FW300NTU manual Filter Counter Reset, Test Pattern, Initialize ALL

Page 43

 

PROJECTOR SETUP menu

 

 

 

COMPUTER2

 

 

FILTER COUNTER RESET

 

COM.AUDIO IN 2

 

Output audio that is input to the

After you replaced the Auto Cleaning Filter (ACF),

COMPUTER AUDIO 2.

REMAINING FILTER of STATUS in PROJECTOR

AUDIO IN Output audio that is input to the

SETUP need to be reset to "0".

AUDIO IN.

1. Press the ENTER button for more than 3 seconds.

 

TEST PATTERN

You can use the 7 different test patterns to adjust the focus of the image. See “Lens shift and positioning” on page 17.

1.Press the ENTER button to display the test pattern 1.

2.Press I H to select the required test pattern.

3.Adjust the focus with the focus lever.

4.Press the MENU or RETURN button to return to the previous menu, or press repeatedly to escape from the menu mode.

The confirmation screen will be displayed.

2.Select OK by pressing I, then press the ENTER button.

3.Display the STATUS and confirm the figure.

NOTE:

•When the projector and/or the screen is tilted, adjust the focus at the center of the image. The upper and lower edge might be out of focus.

•When the image is distorted in keystone, adjust the KEYSTONE in POSITION menu.

INITIALIZE ALL

You can reset all of the customized settings to the factory defaults except NETWORK, RUNTIME and REMAINING FILTER of STATUS in PROJECTOR SETUP menu.

1.Press the ENTER button.

2.Select OK by pressing I, then press the ENTER button.

3.Turn off the power by pressing the power button.

4.Switch off the MAIN POWER button to reset the projector.

5.Switch on the MAIN POWER button.

6.Press the power button.

7.The minimum required setting screen will be displayed.

See “Minimum required setting screen” on page 11.

NOTE:

•The security system is deactivated by default and when initialized.

•When the projector is initialized, it will be reset to the factory default password operation.

Settings

ENGLISH - 43

Page 42 Page 44
Image 43
Page 42 Page 44
Contents PT-FW300U Dear Panasonic Customer Important Safety NoticePanasonic Important Safety NoticeDeclaration of Conformity Trade NameContents Appendix SettingsMaintenance ContentsPrecautions with regard to safety Do not set up the projector outdoors Precautions with regard to safetyDo not look into the lens while the projector is being used Do not mix old and new batteries Remove the used batteries from the remote control promptlyDo not put your weight on this projector Use only the specified batteriesOptical components SecurityOrder to get the best picture quality Liquid crystal panelPower cord AccessoriesPower cord secure lock Read this first Minimum required setting screenControl panel About Your ProjectorProjector body Top and front viewLamp unit compartment Air exhaust port Auto cleaning filter ACF Front leg Adjusters CompartmentAbout Your Projector Back and bottom view Security lockBattery compartment Remote controlAttaching a hand strap Top view Remote control indicator CLOCK, Clock Phase and Signal Search forProjection size 16 Throw distance L Setting upScreen size and throw distance Calculation methodsMounting on the ceiling and projecting from front Front leg adjusters and throwing angleSetting up Projection methodVertical shift Adjusting the lens shift leverLens shift and positioning Horizontal shiftWhen the screen position is fixed Setting up Projector location rangeWhen the projector position is fixed LAN terminal Connecting example ComputersConnections Before connection to the projectorConnections Connecting example AV equipmentConnecting with Video IN/S-VIDEO Connecting with DVI-DDirect power on function Switching the projector on/offPower cord ConnectingSwitching the projector on/off Power indicatorPower indicator informs you the status of the power Switch off the Main Power on the back of the projector Switching on the projectorSwitching off the projector Switch the Main Power on Press the power buttonProjecting an image Selecting the input signalPositioning the image Facing to the projector Remote control operationSetting up the image position automatically Operating rangeEnlarging the centered area Switching the input signalStopping the projection Resetting to the factory default settingsProjecting an image in INDEX-WINDOW mode Capturing an imageProjecting 2 different source image at a time Using an assigned functionSwitching the signal Side by Side function signal combination tableLaser pointer beam emitter Using the laser pointerControlling the volume of the speaker Disable the Laser buttonOSD Design Menu NavigationMain menu and Sub-menu Input GuideMenu Navigation Closed Caption SettingDisplaying the Main menu Adjusting with the bar scale itemsOperating procedure Navigating through the menuPicture menu TV-SYSTEM Color TemperatureDaylight View Digital Cinema RealityPosition menu 169 AspectPosition menu Aspect ratio optionsFrame Lock DVI-D Closed Caption SettingScreen Setting Display Option menuSxga Mode Auto SetupSignal Search Wide ModeDisplay Option menu Other FunctionsCOMPUTER2 Select Projector Setup menuNo Signal SHUT-OFF StatusFunction Button InstallationHigh Altitude Mode Audio SettingRemaining Filter of Status in Projector Filter Counter ResetTest Pattern Initialize ALLText Display PasswordPassword Change Security menuSecurity menu Menu Lock PasswordControl Device Setup Menu LockNetwork menu, the following items are available Wireless LAN PT-FW300NTUonlyNetwork menu Items in Network menuTemp indicator TEMP, Lamp and Filter IndicatorsManaging the indicated problems Lamp indicatorCleaning the projector Care and ReplacementReplacing the Lamp unit Before replacing the ACF Replacing the Auto Cleaning Filter ACFCare and Replacement Replacement procedure When to replace the ACFOn a soft cloth Resetting the RemainingCounter Reset in Projector Setup Turn the projector upside down and place it gentlyTroubleshooting KHz MHz List of compatible signalsTechnical Information Quality*2Serial terminal Projector Technical Information Cable specificationsControl commands Computer connection guidanceRemote terminal Lamp switchingSwitching input Signals Input signalInstalling the safety cable Ceiling mount bracket safeguardsDVI-D in terminal LW m = 0.0339 x SD LT m = 0.0653 x SD Screen size and throw distance for 169 aspect ratioScreen size and throw distance for 43 aspect ratio SW m = SD x SH m = SD xSpecifications Audio VideoOUT DVI-DTrademark acknowledgements DimensionsUnit mm Function IndexIndex Picture ModePT-FW300NTU/PT-FW300U Avis important concernant la sécuritéNuméro de série Déclaration de conformité Avis important concernant la sécuritéAvertissement AdvertenciaAvertissement Précautions de sécuritéPrécautions de sécurité Mises EN GardePrécautions lors du transport Précautions lors de linstallationPrécautions lors de lutilisation Affichage à cristaux liquides SécuritéComposants optiques Délai de remplacement de lUnité de la lampe Remplacement de lunité de la lampeAvant de remplacer le lUnité de la lampe Protections du support de montage au plafond Installation du câble de sécuritéRetirer et remplacer la lampe
Top Page Image Contents