Panasonic PT-FW300U manual Projector Setup menu, Status, COMPUTER2 Select, No Signal SHUT-OFF

Page 41

PROJECTOR SETUP menu

Remote control

Control panel

See “Navigating through the menu” on page 32. See “Main menu and Sub-menu” on page 30.

STATUS

You can see the status of the projector about the following items.

	Items	Description
	SIGNAL
	NAME	Projecting signal name
	FREQUENCY	Projecting signal frequency
	RUNTIME
	PROJECTOR	Duration of projector used time
	LAMP	Duration of lamp used time
	REMAINING	FILTER
	QUANTITY	Quantity of filter remaining
	APPROX.TIME	Approximately time of filter
	APPROX.TIME	remaining
		remaining

NOTE:

•QUANTITY and APPROX.TIME of REMAINING FILTER is not the accurate but the calculated and predicted result based on the filter rolling pace. Incorrect remaining time could be displayed briefly; such as suddenly shortened or stays same for a while.

•Replacement of the Auto Cleaning Filter (ACF) needs to be prepared when the QUANTITY and APPROX.TIME of REMAINING FILTER becomes few.

COMPUTER2 SELECT

You can switch the function of the COMPUTER2 IN/ 1 OUT terminal.

INPUT	COMPUTER2 IN
OUTPUT	COMPUTER1 OUT

NO SIGNAL SHUT-OFF

You can set the timer to switch off the power of the projector after a certain period of time automatically when no signal is detected. Press I H to select the required period from 15 to 60 minutes at intervals of 5 minutes.

		DISABLE
FG						FG

15 MIN.						60 MIN.

FG						FG

20 MIN.						55 MIN.
FG						FG

25 MIN.						50 MIN.
FG						FG

30 MIN.						45 MIN.
FG						FG

35 MIN.			IH			40 MIN.

INITIAL START UP

You can select how the projector start when the power cord is connected.

	Options	Description

	LAST MEMORY	Start as the same mode as the
	LAST MEMORY	last switched off.
		last switched off.
	STANDBY	Always start in standby mode.
	ON	Always start in projecting
	ON	mode.
		mode.

Settings

ENGLISH - 41

Image 41

Contents PT-FW300U Dear Panasonic Customer Important Safety NoticeDeclaration of Conformity Important Safety NoticeTrade Name PanasonicContents Maintenance SettingsContents AppendixPrecautions with regard to safety Do not look into the lens while the projector is being used Precautions with regard to safetyDo not set up the projector outdoors Do not put your weight on this projector Remove the used batteries from the remote control promptlyUse only the specified batteries Do not mix old and new batteriesOrder to get the best picture quality SecurityLiquid crystal panel Optical componentsPower cord secure lock AccessoriesPower cord Read this first Minimum required setting screenProjector body About Your ProjectorTop and front view Control panelAbout Your Projector Back and bottom view Auto cleaning filter ACF Front leg Adjusters CompartmentSecurity lock Lamp unit compartment Air exhaust portAttaching a hand strap Top view Remote control indicator Remote controlCLOCK, Clock Phase and Signal Search for Battery compartmentScreen size and throw distance Setting upCalculation methods Projection size 16 Throw distance LSetting up Front leg adjusters and throwing angleProjection method Mounting on the ceiling and projecting from frontLens shift and positioning Adjusting the lens shift leverHorizontal shift Vertical shiftWhen the projector position is fixed Setting up Projector location rangeWhen the screen position is fixed Connections Connecting example ComputersBefore connection to the projector LAN terminalConnecting with Video IN/S-VIDEO Connecting example AV equipmentConnecting with DVI-D ConnectionsPower cord Switching the projector on/offConnecting Direct power on functionPower indicator informs you the status of the power Power indicatorSwitching the projector on/off Switching off the projector Switching on the projectorSwitch the Main Power on Press the power button Switch off the Main Power on the back of the projectorPositioning the image Selecting the input signalProjecting an image Setting up the image position automatically Remote control operationOperating range Facing to the projectorEnlarging the centered area Switching the input signalProjecting an image in INDEX-WINDOW mode Resetting to the factory default settingsCapturing an image Stopping the projectionSwitching the signal Using an assigned functionSide by Side function signal combination table Projecting 2 different source image at a timeControlling the volume of the speaker Using the laser pointerDisable the Laser button Laser pointer beam emitterMain menu and Sub-menu Menu NavigationInput Guide OSD DesignMenu Navigation Closed Caption SettingOperating procedure Adjusting with the bar scale itemsNavigating through the menu Displaying the Main menuPicture menu Daylight View Color TemperatureDigital Cinema Reality TV-SYSTEMPosition menu Position menu AspectAspect ratio options 169Frame Lock Screen Setting Closed Caption SettingDisplay Option menu DVI-DSignal Search Auto SetupWide Mode Sxga ModeDisplay Option menu Other FunctionsNo Signal SHUT-OFF Projector Setup menuStatus COMPUTER2 SelectHigh Altitude Mode InstallationAudio Setting Function ButtonTest Pattern Filter Counter ResetInitialize ALL Remaining Filter of Status in ProjectorPassword Change PasswordSecurity menu Text DisplayControl Device Setup Menu Lock PasswordMenu Lock Security menuNetwork menu Wireless LAN PT-FW300NTUonlyItems in Network menu Network menu, the following items are availableManaging the indicated problems TEMP, Lamp and Filter IndicatorsLamp indicator Temp indicatorReplacing the Lamp unit Care and ReplacementCleaning the projector Care and Replacement Replacement procedure Replacing the Auto Cleaning Filter ACFWhen to replace the ACF Before replacing the ACFCounter Reset in Projector Setup Resetting the RemainingTurn the projector upside down and place it gently On a soft clothTroubleshooting Technical Information List of compatible signalsQuality*2 KHz MHzSerial terminal Control commands Technical Information Cable specificationsComputer connection guidance ProjectorSwitching input Signals Lamp switchingInput signal Remote terminalDVI-D in terminal Ceiling mount bracket safeguardsInstalling the safety cable Screen size and throw distance for 43 aspect ratio Screen size and throw distance for 169 aspect ratioSW m = SD x SH m = SD x LW m = 0.0339 x SD LT m = 0.0653 x SDSpecifications OUT VideoDVI-D AudioUnit mm DimensionsTrademark acknowledgements Function IndexIndex Picture ModeNuméro de série Avis important concernant la sécuritéPT-FW300NTU/PT-FW300U Avertissement Avis important concernant la sécuritéAdvertencia Déclaration de conformitéAvertissement Précautions de sécuritéPrécautions de sécurité Mises EN GardePrécautions lors de lutilisation Précautions lors de linstallationPrécautions lors du transport Composants optiques SécuritéAffichage à cristaux liquides Avant de remplacer le lUnité de la lampe Remplacement de lunité de la lampeDélai de remplacement de lUnité de la lampe Retirer et remplacer la lampe Installation du câble de sécuritéProtections du support de montage au plafond