Zebra Technologies SL5000r/T5000r @ Select Font by Name, Ax Select Alphanumeric Font, $x Barcodes

3 Command Enhancements

And Differences

^A@ - Select Font by Name

This command only applies to built-in fonts or bitmap fonts downloaded via the ~DB command.

^Ax - Select Alphanumeric Font

PPI uses scalable fonts rather than bitmapped fonts.

^B$x - Barcodes

PPI includes the following barcodes:

^B$A - UPC-E0

Command Format: ^B$A fp, hgt, rdt, pos, chk

a:UPC-E0 barcode command fp: Barcode orientation

N = No Rotation (Default)

R = Rotate 90 degrees, clockwise I = Rotate 180 degrees, inverted

B = Rotate 90 degrees, counter-clockwise hgt: Barcode Height

Value entered in dots at the printer dpi.

The default is 10 dots or the height set by the ^BY command. If the height exceeds the label length, then the barcode is cut off at the bottom of the label.

rdt: Human readable data

Y = Print human readable data (Default) N = No human readable data

pos: Human readable data print position Y = Print it above the barcode

N = Print it below the barcode (Default) chk: Mod-10 Check Digit

Y = Calculate and print check digit (Default) N = No check digit

25