Zebra Technologies SL5000r/T5000r HY Upload Graphic, IL Image Load, IM Image Move, Is Image Save

^JX - Cancel Partial Input Format

^JR - Power On Reset

^JM - Set Half Density

^HY - Upload Graphic

This command uploads different graphic image formats from RAM or Flash to the host.

^IL - Image Load

This command recalls an entire label graphic image previously stored in RAM for overlaying with other label data which follows this command.

^IM - Image Move

This command recalls the stored graphic bit-image and places it on the label (without magnification).

^IS - Image Save

This command saves an entire label in RAM as a graphic image for recalling later and for overlaying with other label data.

~JA - Cancel All

This command cancels the current label printing (if any) and clears any label definition data queued in the PPI input buffer. ~JA is a preparser command which is processed immediately when the command is sent. Before sending the command set the menu options “Preparser Command” and “Preparser Port” accordingly.

~JL - Set Label Length

This command performs a calibration and sets the label length. For ZGL, the related menu option is under Media Control Set Label Length. Select the Automatic option to set the label length according￿to the calibration length.

This command sets the printer density to half.

This command resets the printer to the power-up state.

This command cancels any partial label definition data queued in the PPI input buffer.

^LH - Label Home

This command sets the “home” x/y coordinate used as a reference for all positioning commands, and, therefore, allows an entire label to be moved without changing the individual element position commands.

21