Appendix B
ZGL-DBCS Series
The
High Byte Menu
The menu selection “HIGH BYTE” on the Front Panel under MENU MODE
When “HIGH BYTE” is set to “Disable”, the most significant bit will be turned off and the code point exceeding 0x7F will be skipped. For example, the input code point “0x3061” will be mapped to “0xB0E1” automatically. If the input code point is “0xB0E1”, it will be skipped.
When “HIGH BYTE” is set to “Enable”, and the leading byte of data exceeds 0x7F, it will be combined with the following byte to form a
The default settings for the High Byte Menu are:
•ZGL HanziGB - DISABLE
•ZGL Hangul - ENABLE
•ZGL JAP - ENABLE
Command Syntax
The
(A) Select Alphanumeric Font Command
Purpose | Allows you to select the alphanumeric font, orientation, and |
| magnification. |
| When the DBCS character set is selected and if the font_id is |
| mapped to a DBCS font, the (A) command can be used to |
| magnify and orientate the |
| DBCS font identifier is “1” for all |
Format | ^ Afont_id {orit}, height, width |
^A | Selects the Alphanumeric Font command. |
font_id | Selects the font choice from: |
A through H -
Acceptable value:
44